[moved] fork or headset wobble

Status
Not open for further replies.
A

arifur794

Member
lately my razor pro headset keeps getting loose. then if i tighten it too much it does not spin. if i dont tighten it enough the fork and bars start to wobble. can someone please help me solve this annoying problem?
 
C

codyferner

Member
First put this in the scooter section
Second to solve this problem you have to find that sweet spot in the headset top nut
 
Jordan Jasa

Jordan Jasa

Silver Member
make sure the two nuts are really tight on each other, then make sure your bars all all the way down, and the clamp is all the way down too.
 
D

domd

Dom_Dalbert
when i painted my bars i painted the nuts and now the stay tight i wont have stock headset much longer.
 
F

FITTEAMTRAIL

Member
just hold the bottom nut so that it's snug but you can still spin your bars fine, then screw the top nut so that it's really tight against the bottom nut that is still snug and then pull your bars down on it so that they're touching the top nut. And lastly pull the clamp down so that it's touching the top nut and tighten.
 
M

Mattt.C

I own WSP.
regrease the bearings in it so u can do it up tighter. i had the same problem i did that with mine it worked mad...
 
T

team_punishment

dargersaurus rex
use some locktite on the nuts.

also when you get it perfect put your bars on and line them up but dont tighten the clamp. then hammer the clamp all the way down until it rest on top of the top nut. then tighten it
 
Status
Not open for further replies.
Top