MY GRIPS AREN'T STICKING

[fly]

ok 2day i put on new grip and i but them on like i always but grips on, by putting a little 3in1 oil in them. my problem is that the right grip stuck and its fine only moves at the very end of it which doesnt bother me, but my left grip only about 1.5 inches on the far inside of it stuck the rest is moving and twisting. should i try my other grips ( i have another set) or what?

 

[scooter27]

you can take the grip off then get the oil off and use hairspray or just water

 

[ridescoot14]

wash them out and use achocol

 

[dre]

ok 2day i put on new grip and i but them on like i always but grips on, by putting a little 3in1 oil in them. my problem is that the right grip stuck and its fine only moves at the very end of it which doesnt bother me, but my left grip only about 1.5 inches on the far inside of it stuck the rest is moving and twisting. should i try my other grips ( i have another set) or what?

 

[mynameisjaymez]

Question Thread.
http://www.andrewbroussard.com/e107_plugins/forum/forum_viewtopic.php?457841

 

[theworm]

fucking noob
dont use oil to get grips on thats why they arent sticking you tard

 

[fly]

well i tried the hairspray, but on my bikes i use the same oil or wd 40 (tried both) and they work but not on scooters

 

[Sshields32]

i use this dank glue called grip lock. smells like poo. but ive never had any problems with throttle grip.

 

[fly]

if the hairspray doesnt work im going to pick up some glue 2mro when i go to get bolts and stuff to lock the foldy

 

[Big L]

Blow a load in your grip

 

[nickpappapump]

wd40 works cause it drys

 

[fly]

i tried wd 40 and it didn't and i was fed up so i just but some golf shaft epoxy on them so these grips wont be coming off unless i cut it off

 

[SharkStammler]

i know this sounds stupid but windex works real good.... my friend told me about it and i been doing it ever since

 

[beastlycaptain]

can i ask what type of metal are your bars? aluminum, steel, copper? what

 

[doyley_kool:]]

i put tape UNDER them

 

[Tylerr.]

AIR COMPRESSER > oil

and yes tape works UNDER them

 

[fly]

can i ask what type of metal are your bars? aluminum, steel, copper? what

there stock razor bars so my guess in aluminum

i put tape UNDER them

i was going to but i found the epoxy and its working great, not even dry and the grips don't move one bit

 

[dre]

Blow a load in your grip

hahahahhaahahahahahahaha, oh lowgg you silly dwarf

 

[Alex.Peasley]

just squirt some cack in there put the grips on and rub in it. you can get it at any corner mate

 

[fly]

whats cack? and i don't need anything, i just check my grips and there rock solid