My R.A.D Bar's

[walter707]

I just bought some R.A.D OG's and i cant fit my double clamp on them what should i do?

 

[spitfire0453]

They fit ightt. You just gott to tighten it down alott.

 

[walter707]

the bar's are to big for my clamp

 

[Zack Jackson]

my double clamp wouldnt fit on my buffs when i first got em.. put some needle nose plyers in between where the bolts go and just stretch it over onto the bars

 

[nfumara1]

stretch it out
http://www.youtube.com/watch?v=MOg0gHbKA4s

 

[walter707]

i stretched it out and now i cant tighten it

 

[AlmonC9]

ahahahahahahaa

 

[spitfire0453]

Stretch that shitt out like you stretchhh a tightt pussyy outt. pryy that shitt.

 

[nate-O.S.K]

you have to like forxe the bolts onto the clamp and it will tighten
unless you've stripped your clamp then you need to buy a new one

 

[Rosco]

Did you stretch it with the screws in it? just making sure

 

[asianpuff16]

stretch your clamp out i have the same bars and i have a stock clamp

 

[junebug13]

take your bolts out of the clamp then use a hammer and tap the clamp onto the bars until its completley on then put the bolts back in then put the bars on the fork then tighten the bolts al the way down then your set 2 ride. Its what I did

 

[xxlmonsterrocks]

Take your clamp and instead of putting the screws in the right way put them in the opposite way then put a penny in the way of it and tighten it as hard as you can and it should stretch.

 

[kurt warren]

if all fails and u have ur clamp on and the bolt doesnt fit, try a longer bolt

 

[Thomas Kananen]

ssssssttttttttttrrrrrrrrreeeeeeeeeetttttttttccccccccchhhhhhhhhh

 

[Jamie N]

Just stretch the clamp by putting the bolt through from the other side with a coin in the middle of the clamp (where the bolt goes through, then just tighten up the bolt until the clamp starts to stretch, stretch the clamp a bit more wider than the size of the bars. unscrew the bolt and your donee.

 

[corruptedrapture]

what size are the bars? maybe you got HIC OG's

 

[carljr]

http://vimeo.com/2410515
have fun!

 

[Cody Appelhans]

You have to strech your clamp so it will fit on the bars