My scooter still wobbles.

[jab987]

My Pro Model is bolted and I just tightened the bolts last night, but it creaks and moves up a little. My headset is tight and everything. Does this mean my bolts are too small? I am getting new bolts today so if they are too small what size do I need?

 

[mdemoss]

1 5/16
2 3/8

 

[jab987]

Ok. Thanks.

 

[mdemoss]

idk about length though
i think its 3.5 in
or maybe 3
just take ur deck with u to make sure

 

[CTRider]

The headtube always moves and/or settles regardless of the bolts used. A bored out the foldy to fit larger bolts and it still settled a little bit. If you tighten it more it will just bend your foldy or put excessive stress on the welds.

 

[Jacek]

Ok first of all u need 1 (3/8) bolt and 2 (5/16) bolts. second, dont tighten it because it creaks, you will break the foldy mech right in half. just tighten the bolts not too much, and push the bars towards the brake. over time it shouldnt creak as much, mine creaked in the beginning and stopped after liek 2 months. and make sure u did it right, if u didnt remove the little bar in the front of it, thats a problem.