need help

Status
Not open for further replies.
R

razorocka7

Member
ok my old scooter (im doing this with new a models) it was bolted like with four bolts and very strong well i snapped the metal sum how so i took the t tube and the folding mech out and i got a new a how do i slide the new a's locking mech out and put my old one in cause i can get the first two bolts or w/e but the other two r under the folding part and i cant get to em ne ideas?
 
T

Thomas Agasid

Member
oh i think i get it
so you unbolted the front twoo or the back two?
if you didn't lock your foldy already just pop those little black thingson the sides out where it folds and on the bottom of the foldy on razor circle logo an take the foldy piece out and you should be able to unbolt the foldy now
im not sure if that's whay you wanted post some pics and others should be able to help you
 
Kc Corning

Kc Corning

Bronze member
please use periods when you post somthing, and try to say somthing like your not talking out of your ass. thanks, if you repost what you said more clearly, then i will be more then happy to help you out.
 
R

razorocka7

Member
I will repost then ok. Well what I am trying to do is take my old scooters t-tube and locking mech out and put it on a new one I have.The few troubles I am having are on the folding mech there are four bolts that go into the deck. There are two out front like closer to your feet on the mech and two under the t-tube where it folds. My old one was mad bolted so i figured i could unbolt the bolts fold it and get the bolts out. Well when I undbolted it i discovered i still cant get to it and the only way to get them off is use a wrench on one side and and allen wrench one the other but i cant get the allen wrench in to hold it.
 
Status
Not open for further replies.
Top