new bars

[etscoots]

i took out my stock 13" bars and i put 16" in and by accident i drilled a bigger hole through the bar then needed and it shakes just a little any one got a way to stop this without getting a new bar or drilling more holes?

 

[team_punishment]

get a bigger bolt

 

[etscoots]

no no no i meant the holes in the bar are to big not the t bar of the scooter

 

[Brian Boston]

Yeah get a bigger bolt so it fills up the hole more.

 

[team_punishment]

just drill the hole in the t-tube bigger

 

[etscoots]

alright thankscasue i taped it and that worked for a while but im still getting a slight movment

 

[chrisisme]

tape it some more.

 

[tomborsari]

what size tubing do you need to make bars

sorry about the bump

 

[WayFastRevo]

7/8 in. but you have to sand it down alot.

 

[tomborsari]

where do i get it?

 

[chrisisme]

hardware stores, onlinemetals.com...

 

[scooter justin 25]

dude..just TIGHTEN THE BOLT AS MUCH AS POSSIBLE!

mine was like that and all i ahd to do was keep on tightening it till it couldnt move..

 

[jeff26]

get 3/4 od tom, fits in better and doesnt require an hour of sanding.