New Part Idea Thread

[tyler_magro]

I think that with a big enough wrench, its possible.

EDIT: i just looked at the blunt IHC. essentially the same concept without the expanding shim. Disappointing to hear that IHC sucks though /:

 

[Dom Marconi]

It's really just too impractical, and who has a problem with using a clamp? Trust me, it's always going to come loose. There just isn't enough room in there to get you enough pressure to keep the bars from slipping.

 

[tyler_magro]

well I will have to rethink my designs and come up with something more promising. But, you have to admit that a clampless scooter would be pretty cool, right? If there was such a compression, i bet it'd be trendy as fuq. Clampless lyfe

 

[Hep Greg]

http://www.amazon.com/gp/product/B001E93GKW?ie=UTF8&force-full-site=1&ref_=aw_bottom_links

-___- ...those things suck.

 

[instinctscooter]

welded in bar ends would be cool.

built in bar ends were on torn bars.

well I will have to rethink my designs and come up with something more promising. But, you have to admit that a clampless scooter would be pretty cool, right? If there was such a compression, i bet it'd be trendy as fuq. Clampless lyfe

I've seen a clampless scooter made by (i think) one of the Bartocheka or guys or whatever the spelling was. it looked really cool and apparently worked, it used like a really long ics bolt i think going into the top of the bar and then tightning at a hole in the top. not 100% sure how it worked but it did, saw the diagram and photo ages ago though

 

[tyler_magro]

omg you need to find it and show me!

 

[Garrett B]

Actually it was not made by Bartek Pachota, he rode it for awhile and then the fork bent. What they did was take a fork and make the fork tube really long so that it went almost to the top of the bars but not quite and then they put a topcap and bolt through the hole of some proto slayers and tightened it down. It looked really clean but it wasn't worth it. He said it was heavy and the metal used was really crappy. I think that we should do away with hic and scs because they are just complication compressing a headset. ICS worked just fine all the years when proto first came out with it. Now all of a sudden these moronic kids don't know how to tighten a bolt properly. I think ICS is the best compression...The only reason I like scs is because it raises your bars. bam.

 

[connormack]

http://youtu.be/oDScCrVPzyc

MADD gear already did that but with a nut instead of starnut

 

[tyler_magro]

Actually it was not made by Bartek Pachota, he rode it for awhile and then the fork bent. What they did was take a fork and make the fork tube really long so that it went almost to the top of the bars but not quite and then they put a topcap and bolt through the hole of some proto slayers and tightened it down. It looked really clean but it wasn't worth it. He said it was heavy and the metal used was really crappy. I think that we should do away with hic and scs because they are just complication compressing a headset. ICS worked just fine all the years when proto first came out with it. Now all of a sudden these moronic kids don't know how to tighten a bolt properly. I think ICS is the best compression...The only reason I like scs is because it raises your bars. bam.

wow that sounds really unnecessary but it prolly looked great. Im pretty sure that nobody has thought of what im trying to do... i really hope it works

And yeah the only real reason i got scs was to raise my bars.

 

[Garrett B]

The picture is in the ooold pages of your scooter thread if you want to see it. I think in the 800-1000's lol. I

 

[jimvandeveld]

welded in bar ends would be cool.

Definitely not a good idea, think of what a bitch getting new grips on would be..

 

[Robert]

i think he just means ones like on torn bars.

 

[thealexbuffery]

y does nobody like my ideas? :c

 

[Robert]

y does nobody like my ideas? :c

because it wasn't good.

 

[thealexbuffery]

because it wasn't good.

oh.



wadafak.

 

[Darcy.A]

y does nobody like my ideas? :c

Yeah no offense dude but changing colours seemes incredibly childish and unnecessary. Also the back wheel warms up when you apply the brake so it would often be red while the front wheel would be blue, which would look stupid. Grips would also warm up due to the body heat from your hands, which would be lame.

 

[Robert]

Yeah no offense dude but changing colours seemes incredibly childish and unnecessary. Also the back wheel warms up when you apply the brake so it would often be red while the front wheel would be blue, which would look stupid. Grips would also warm up due to the body heat from your hands, which would be lame.

they already make color changing grips.

 

[Snuffalgus]

How about a wax company? A few friends and I thought of the idea to make wax and put it into a deodorant stick for easy wax on the go. We have a name and logo ideas made, would this be a pretty good idea? It can mainly be for scooters but wax for anyone (skate, bmx, inline skates, etc).

 

[iliveinahouse1]

How about a wax company? A few friends and I thought of the idea to make wax and put it into a deodorant stick for easy wax on the go. We have a name and logo ideas made, would this be a pretty good idea? It can mainly be for scooters but wax for anyone (skate, bmx, inline skates, etc).

just use skate board wax, all thought the idea is cool

 

[Chris Vincent]

A wax company?? Ermahgerd nerberdyy has errverrr dern that.