Non threaded bars?

[acausedelle]

I just got a new scooter with custom bars, but they aren't threaded, and I don't know how to install them. The fork is threaded. How do I install them?

 

[scooterinsanity]

slide them on, no bars are threaded

 

[acausedelle]

slide them on, no bars are threaded

If it were that easy to slide on, I wouldn't be making this topic. They aren't sliding on.

 

[dezbert]

What forks? What bars?

No bars are threaded except for stock Razor/Micro/Blade?whatever
They should just slide/twist on easily.

 

[Electaguitar]

HMMM. Try taking the others bars off.




Then screw in the one pieces. If that doesn't work, resort to -


Magic.

 

[acausedelle]

Double post. Sorry.

 

[acausedelle]

What forks? What bars?

No bars are threaded except for stock Razor/Micro/Blade?whatever
They should just slide/twist on easily.

They're custom bars that I got from titetoyz.com. I'm twisting with all my strength, and they aren't going on. The fork is a razor pro

 

[cmjscooter]

are you holding the fork still while you twist?

 

[acausedelle]

I've managed to get them on with my brute strength (I'm a weakling). I swear that those things aren't the right size though...

 

[dezbert]

Do the bars have a slit at the bottom?

 

[Brian Boston]

Do the bars have a slit at the bottom?

and if they do, cut it more.

 

[kieran1]

thats what i did brian

 

[mcnutty93]

Alright same thing happened to me. Just put them on as much as u can wth your hands then put a block of wood right where the two tubes meet then hammer the wood and that'll push them on

 

[Michael Rankin]

What forks? What bars?

No bars are threaded except for stock Razor/Micro/Blade?whatever
They should just slide/twist on easily.

no bars are threaded, period. they only look threaded because the threads on the fork or jammed against the bars and the threads are digging into the metal slightly

 

[Chris Sanchez]

Yep, no bars are threaded. n0Ne.

 

[joeyamos]

cut another slit? razor bars have 2

 

[Michael Rankin]

cut another slit? razor bars have 2

thats how french id bars are cut, 1 slit in front, and 1 in back, but that way makes it easier for the bars to crack at the slits