Paint Phorx

[Chris_Colon]

i would like to remove the original paint on my phorx an re paint them red. how would i do this step by step to make it look good? like not sloppy at all

 

[Bill]

1. Paint Strip them
2. Primer
3. Paint
4. Clear Coat

 

[Zach Hamrick]

1. sand the living wangwang out of them.
2. take a rag and put paint stripper on it and whipe down your forks.
3. light coats of red. extremely light coats, and wait like an hour inbetween, or it will drip horribly.
4. let dry in the sun for like a day.

 

[Bill]

And if you want it to last even longer put a couple coats of clear over it. Or you could just get them powdercoated.

 

[Stackies]

1. sand the living wangwang out of them.
2. take a rag and put paint stripper on it and whipe down your forks.
3. light coats of red. extremely light coats, and wait like an hour inbetween, or it will drip horribly.
4. let dry in the sun for like a day.

haahhaha.

 

[JeffMroz]

just use heavy duty oven cleaner then it just wipes off

 

[Chris_Colon]

jeff i got these phorx from u, why did u even need to post here? u just as easily could have told me this at circus or on fb aha