Parts for scooters

[Kiradaw]

Hey guys i would love to have a list of parts that you use to pt new parts on and take old ones off like wrenches allen keys etc. and things like what to use to put bearings on etc. thanks guys

 

[Derek Seay]

ugh.
5 and 6mm allen wrench
13mm wrench or socket
4mm allen wrench
10mm wrench

 

[Rob.]

metric 5 allen for most of it
plumbers wrench for top nuts on threaded stuff
5/16ths sockets for bolts

 

[Joey Wallace]

2 5mm allen wrenches is all i need for my scooter.

 

[Kiradaw]

What about for bearings?

 

[dirtbiker2424]

a vise or rubber malet

 

[D ∆ V I D]

putting bearings in kind of ghettoly but works the best for the cost of the materials

3 in 5/16 bolt the same one for bolting foldys
slide one bearing on the bold, then the wheel, then the spacer, then the other bearing, then more spacers until they are higher up on the threads. then and optional washer and nut. tighten the nut and kind of guide the bearings so they go straight in. eventually the pressure will push in the bearings and you won't ruin them just make sure not to over tighten