Pinning French id forks

[JohnMorris10]

wat is pinning french id forks becuase im going to get some and people keep saying you need to pin them


1.) wat is it

2.) how do you do it

3.) is it hard

4.) do you need any special tools

 

[lukeakascooter]

pining a french id fork is where there is a small bolt hold the legs of the fork to the fork tube it isnt hard to do just drill two hole either side of the fork and put a small bolt, make sure you drill though the fork tube and the legs to get the full effect

 

[Seth Brown]

if you don't already have a FiD fork, then most likely the one you buy will already be pinned

 

[Riley Hughes]

if you buy it from the scooterresource store it will already be pinned, brahh!

 

[scoodeeni]

if you buy it from the scooterresource store it will already be pinned, brahh!

yea

 

[haydenscoots1151]

he lives on AUS tho.
does any one no where AUS people can buy french id forks PINNED

 

[Michael Rankin]

this thread could have been avoided so easily

 

[Tanner!]

step 1) buy from SR
step 2) they pin for you
step 3) take a break from SR and go ride once you receive your fork.
step 4) yay

 

[Jamie N]

right.
theres a good tutorial on how to pin them properly (even after they have broken) on the french id website.
http://www.frenchid.com/scooters/fork_en.html

 

[BrianK N(WMS)]

step 1) buy from SR
step 2) they pin for you
step 3) take a break from SR and go ride once you receive your fork.
step 4) yay

the french id is not in stock at sr.
nobody really has them in stock

 

[JohnMorris10]

step 1) buy from SR
step 2) they pin for you
step 3) take a break from SR and go ride once you receive your fork.
step 4) yay

i live in australia where can u get them there