[poll] riveting insteed of bolting your cross bar on stocks

[ktmfmx]

well yeah it has like no wobble at

 

[alexanderespinoza]

excellent if you have the tools

 

[ktmfmx]

tools requred drill rivets rivet gun and drill bits

 

[Steezeman]

Just use bolts, it's obviously better.

 

[JoshToy]

Fail. If you break a rivet, you're screwed. You can't really break a bolt for a bolted t-bar. Worst that could happen is it loosens up, and you can just tighten it.

I wouldn't even test rivets.

 

[FITTEAMTRAIL]

Fail. If you break a rivet, you're screwed. You can't really break a bolt for a bolted t-bar. Worst that could happen is it loosens up, and you can just tighten it.

I wouldn't even test rivets.

Hahaha

 

[ktmfmx]

http://www.youtube.com/watch?v=s58LB9TJN8w&feature=related like this at 1:10

 

[mitchwashere53]

depends on how many you put in

 

[JoshToy]

I'd just stick to bolting to be honest. If you think it's a hassle to bolt. I have a tip that may make it a lot easier for you to install the nut. I haven't heard or seen anyone use this tip before, but it's helped me in the past. Use the button inside the t-bar. Put the nipple of the button in the hole of the nut, slide it into the t-bar. Once you line the nut up with the hole on your t-bar, just screw the bolt in. As you screw the bolt in, the nipple for the button will be pushed out of the nut, and you can remove the button from the t-bar.

Makes it so much easier.

 

[konowaluk]

yeah just drill a small hole and put a big screw in and it will never move

 

[alexiorio]

What the fuck is a rivet anyway?

 

[JonnyJonDogg]

fail

 

[Josh Herman]

fail

^^^^