Pro heqdtube angle

[-nathan-]

I am currently riding an old laser-ped scooter as i am jst starting out.
Im looking at getting a pro.
So
on my current scot the bars are pretty straght up an dwn ie dont lean back.
When i rode my freinds new? A the headtube and bars were andgle heaps back at me and being 6 foot it really didny work
so what im asking is if the bars on the pro are the same or if they arent lent as far back
thanks

 

[Vito]

no, the angle is good. But if you want more vertical bars, you can change headtube angle, when you'll lock foldy just install 8mm bolt in front hole and 10mm behind headtube.

 

[Ryan Kang]

you can change the angle with diff size bolts.

 

[JonDev]

bolt it normally but in the middle put a foldy pin and a deck plate. its on the bottom of the deck if you take the plastic piece off. take those two pieces and put them in there. then drill out the headtube till a normal bolt fits. it makes the bars nice and striaght up. mines like that and i love it pm me if you dont exactly get what im sayinggg.

 

[Michael Rankin]

bolt it normally but in the middle put a foldy pin and a deck plate. its on the bottom of the deck if you take the plastic piece off. take those two pieces and put them in there. then drill out the headtube till a normal bolt fits. it makes the bars nice and striaght up. mines like that and i love it pm me if you dont exactly get what im sayinggg.

what?

 

[JonDev]

basically you can take a big bolt and slide it in the middle. and a regular bolt on the bottom. you will see that the headtube angle is striaght up but the bolt doeasnt slide through (top bolt) so drill the headtube accordingly. didnt make sense first time i said it. hahahahhhahhah

 

[OllieScoots!]

bolt it normally but in the middle put a foldy pin and a deck plate. its on the bottom of the deck if you take the plastic piece off. take those two pieces and put them in there. then drill out the headtube till a normal bolt fits. it makes the bars nice and striaght up. mines like that and i love it pm me if you dont exactly get what im sayinggg.

ur a idiot... that plate on ur deck is to stop the deck snapping if u take it out ur scooter will be weak as P1SS:O

 

[JonDev]

yeah i meant take it from an old deck

 

[JDBen]

why are n00bs worried about headtubes

not trying to be mean but did you just hear some other kid at the skatepark saying it?

 

[-nathan-]

Well now i know why people dont like scooters
but thanks to the guys who have helped i just didnt want to end up with a scooter i was uncomfortable riding
and no i didnt hear what a headtube was from someone at the skatepark. Im not one of those 10 year olds with 200 dollar scoots who cant tailwhip.
Fyo jd ben i actually know quite a bit about bikes and alot translates over to scooters
and after snapping my deck tailwhipping an 8 i need the pro now so thanks again to those who have been helpful
and i also dont even ride park i ride street