PROMod ReiNForCemeNtS

[fashow69]

yea im thinkin if i like made a bunch of sqaure reinforcements specifically for the ProMod just like micros reinforcements would any of yall buy them? just curious..

 

[chadneroscott]

if shipped to aus

 

[Hep Greg]

if they're already drilled out and stuff, i might buy a set.

 

[Jdbug_rob]

im a bit of a weight freak so i'd just get eric magray style reinforcments cos there lighter!

 

[yamamsmells]

just go to a local steel store they sell alliminium at the store near me, heres the reinforcements i did with my b

 

[fashow69]

if they're already drilled out and stuff, i might buy a set.

yes they will be pre drilled the only thing you have to do is drill out the two holes under mech were the screws go for that plate inside your deck to 5/16 which is basically the same size as your wheel axel hole and doing so wont be hard at all cuz theres holes there allready that are pefectly lined up and stuff you just gotta make them bigger. and you will also have to go to home depot or were ever and 3- 4 1/2 inch 5/16 bolts. or if you want you can just send your deck to me and ill install them for you but that would cost extra.

im a bit of a weight freak so i'd just get eric magray style reinforcments cos there lighter!

not that weight really matters on a scooter but thats your preference.

just go to a local steel store they sell alliminium at the store near me, heres the reinforcements i did with my b

yes thats what im tryna do but not everyone has the means or possibly know-how to do that i just wanna provide it to make it easier for everyone else. also i have done pretty much every possible deck/drop out reinforcement there is and i find the sqaure tube one better out of all of them. and they also help with 50-50s and icepicks and such if your into those.

 

[fashow69]

whoops dub post.

 

[Steezeman]

Go for it dude, but I think you might as well sell the bolts with the reinforcement, then it would be that much work the little nooblets won't have to do.

 

[chrisisme]

i think an Eric-type mod is better for me since the scooter's bolts still go through to the foldy plate and everything. But if they're cheap (read: Not Micro), then yeah.

 

[kylefrncs]

if u make um u shuld make theholes for the back same size as axle and in front same size as the reinforcemtn so it wuld b easy

 

[ENERGY TURTLE]

I would buy some once mine broke.

 

[fashow69]

i think an Eric-type mod is better for me since the scooter's bolts still go through to the foldy plate and everything. But if they're cheap (read: Not Micro), then yeah.

yes it is alot easier to do but doesnt last very long and your scoot ends up with a horrible rattling noise.

if u make um u shuld make theholes for the back same size as axle and in front same size as the reinforcemtn so it wuld b easy

yes i do that allready and you have to have the front bolts 5/16 or else its not gonna hold properly. and also i might as well just add the bolts so yea i would do that.

 

[yamamsmells]

i didnt do my reinforcements, my dad did lol kinda too complicated for me haha.

 

[Matt Dibble]

i still like mine

 

[DavidMiles47]

do these type of reinforcements prevent bending ur dropouts?

 

[lloyd]

yes

 

[viva-la-deej]

Go for it dude, but I think you might as well sell the bolts with the reinforcement, then it would be that much work the little nooblets won't have to do.

That is now my favourite word.
But yeah, i think its a good idea!

 

[Hep Greg]

if they're already drilled out and stuff, i might buy a set.

yes they will be pre drilled the only thing you have to do is drill out the two holes under mech were the screws go for that plate inside your deck to 5/16 which is basically the same size as your wheel axel hole and doing so wont be hard at all cuz theres holes there allready that are pefectly lined up and stuff you just gotta make them bigger. and you will also have to go to home depot or were ever and 3- 4 1/2 inch 5/16 bolts. or if you want you can just send your deck to me and ill install them for you but that would cost extra.

yes, it will be hard, cause im in college, and i dont have a drill lol.

 

[Eric Magray]

i think an Eric-type mod is better for me since the scooter's bolts still go through to the foldy plate and everything. But if they're cheap (read: Not Micro), then yeah.

yes it is alot easier to do but doesnt last very long and your scoot ends up with a horrible rattling noise.

o really??

 

[skavenger]

i think an Eric-type mod is better for me since the scooter's bolts still go through to the foldy plate and everything. But if they're cheap (read: Not Micro), then yeah.

yes it is alot easier to do but doesnt last very long and your scoot ends up with a horrible rattling noise.

o really??

I just finished doing the reinforcments your way. Its good <3.