Quebec and Tilt pegs on an Inward

[Jared Cee]

I know neither of these are supposed to be compatible w inwards, but if i file them will either one of them fit?

 

[krogerer21]

all u hav to do is get a longer bolt for them, my tilts BARELY fit on my lucky nw!

 

[Jared Cee]

thx. any thoughts on which one to get

 

[lloyd]

tilts have a smaller diameter.
qcs have a bigger diameter, but still clears pro decks.

both are made out of heat treated aluminum. Only thing is that you cannot use stock axles with tilts, but they come with their own bolts.

 

[Jared Cee]

alright. what about district steel pegs

 

[lloyd]

alright. what about district steel pegs

theyre not out yet and I didn't see any reviews on them. Theyre probably just as good though.

 

[Jared Cee]

tilts have a smaller diameter.
qcs have a bigger diameter, but still clears pro decks.

both are made out of heat treated aluminum. Only thing is that you cannot use stock axles with tilts, but they come with their own bolts.

do u think they will fit an inward if i file them down a little

 

[lloyd]

do u think they will fit an inward if i file them down a little

I have no idea haha, I've never had a pair.

 

[Riley Hughes]

tilts are made out of a harder aluminium, and are thicker. they wiegh about the same, cost about the same.
also, quebec has been out forever, so you know they've got to be solid. but i have tilts and they are hella legit.

but to fit either one on an inward you need spacers and a longer bolt.

or go here: http://www.hardlinescooters.com/

 

[Josh Young]

dont file the pegs down. file down the fork son!

 

[Ryan Kang]

dont file the pegs down. file down the fork son!

file down the fork enough so 1 bearing spacer fits and then you get a longer bolt and put a peg

 

[Derek Seay]

tilt pegs arent even on inward!

 

[Derek Seay]

oops read it wrong

 

[Kevin Lo]

Well put a longer bolt and a bearing spacer.

 

[Chandla]

will pegs fit on a senior fork???

 

[lloyd]

Qcs pegs do, that I know. They fit Old sr forks great so I believe they work just as good with seniors.

 

[Jacob D.]

will pegs fit on a senior fork???

they fit on the old SR fork so I guess they'll fit on the senior

 

[jonahreenders]

tilts are made out of a harder aluminium, and are thicker. they wiegh about the same, cost about the same.
also, quebec has been out forever, so you know they've got to be solid. but i have tilts and they are hella legit.

but to fit either one on an inward you need spacers and a longer bolt.

or go here: http://www.hardlinescooters.com/

Wow. Tilts look sooo much better!

 

[lloyd]

Wow. Tilts look sooo much better!

Those are the old pegs. The new ones have a thicker wall

 

[Josh Young]

well if qsc pegs fit on a senior then i guess tilts will too. i want a senior fork sooooo bad right now... omg