Quebec Scooter Peg Review

[conordavidson]

Quebec Scooters Pegs!!!

+ Fit stock axles unlike sockets.

+ Very Light

+ PERFECT length and diameter in my opinion. Not too long, not too short.

+ Inexpensive. They're $15 for a pair (18 CAD), new sockets are basically that much.

+ They grind smoooooth cause they're aluminum.

+ PERFECT for park.

+ You can cut them down easy if you want the front and back back to be flush with each other.

- The downside to aluminum is that they could crack over time and they get worn down from rough steel and concrete surfaces.

- For street, you might need to replace them after like 4 months, but for the price that's pretty good.

BUY FROM THIS KID. They came in like 1 week from Canada. Awesome products, at a low price. LEGIT x12.

You can get them here:
http://www.qcscooters.com/pegs.html

 

[proscooter46]

good review

 

[Rob.]

So good looking

 

[714*fo*life]

Conor do you think they will bend easy?

 

[conordavidson]

Conor do you think they will bend easy?

Doubt it. They have a pretty thick wall and they're only 2 inches long, so I doubt it. If they did you could just flip them over so they bent the other way. However, aluminum has a tendency to crack before it bends, but I also doubt that they would crack.

 

[714*fo*life]

Conor do you think they will bend easy?

Doubt it. They have a pretty thick wall and they're only 2 inches long, so I doubt it. If they did you could just flip them over so they bent the other way. However, aluminum has a tendency to crack before it bends, but I also doubt that they would crack.

Alright, sick.

 

[master]

They woudlnt fit inward forks would they?

 

[conordavidson]

They woudlnt fit inward forks would they?

They fit SR forks, so I don't see any reason why not.

 

[Jon.]

idk ill post when mine come or send u a pm

 

[Steve Moore]

That's cool, I might buy some.

 

[idk47]

I was gonna buy some, but i gotta wait to see if i have extra cash.

 

[Lil Steve]

I might try some out...

 

[714*fo*life]

I might try some out...

 

[Humma]

sound strong.

Does the site ship to australia?

 

[NickGraham.]

so how easily can you do like ice/tooth picks on them?

 

[conordavidson]

They ship everywhere. I just cut mine so they're flush with my reinforcements. Front peg + reinforcements <3. All you need is a hack saw and a file and you can cut it and get some nice rounded edges. Sure it won't be the straightest cut, but it's a peg, they're meant to take abuse.

 

[Jon.]

soooooooooo easy to ice pick and toothpick

 

[Madis]

yeah, i got mine like a few days ago, haven't had a chance to test them yet.

And, they seriously don't weigh anything. 4 pegs weigh less than a pro-model wheel.

 

[humpurple kushiones]

bearings dont fit inwards. are these smaller then bearings?

 

[conordavidson]

One thing that could be improved is if the wall was a little bit thicker so the bottom of the peg lined up with the bottom of the reinforcements/deck.