Question Thread. (Ask here if you havent searched)

Status
Not open for further replies.
Eat Joo Food

Eat Joo Food

Member
nickd said:
how can i make pegs so they come out of both sides of my wheels? so i can grind on my left or right, i've seen it done im just not sure how it was done
Click to expand...

BEARINGS PEGS BOTH SIDES
first of all, use a back axel in the front wheel. then get a screw with threads that fits into the axle that screws in good. put the bearings on the axel, put your wheel on the fork, put it in to the end of the bearinG. then put the bearings on the screw that fits into your axel, put it through the fork tube to the axel that goes to the end of the bearing in your wheel. .
Repeat with the back, but make sure the screw goes through one of the spacers.
 
M

mynameisjaymez

Member
nickd said:
how can i make pegs so they come out of both sides of my wheels? so i can grind on my left or right, i've seen it done im just not sure how it was done
Click to expand...
You have a couple of options. As was said. A double peg bearing would work. Or you could use a double socket as well it depends how big you want the peg. Youll most likely need a trip to home hardware in the end. Post some pics and I could help further.
scooter kid said:
wat size star nut do i need for buff bars
i got a 1-1/4 inch will it work
Click to expand...
You only need a star nut for an SR fork not for buffs.

Thanks guys for supporting this. Lets keep it going, i would like some mods to help with the questions too. Idk maybe there too busy.
 
S

scooter27

Member
James McCalmont said:
nickd said:
how can i make pegs so they come out of both sides of my wheels? so i can grind on my left or right, i've seen it done im just not sure how it was done
Click to expand...
You have a couple of options. As was said. A double peg bearing would work. Or you could use a double socket as well it depends how big you want the peg. Youll most likely need a trip to home hardware in the end. Post some pics and I could help further.
scooter kid said:
wat size star nut do i need for buff bars
i got a 1-1/4 inch will it work
Click to expand...
You only need a star nut for an SR fork not for buffs.

Thanks guys for supporting this. Lets keep it going, i would like some mods to help with the questions too. Idk maybe there too busy.
Click to expand...
wat i mean is i have an sr fork with no star nut so i went to a bike shop and got a 1-1/4 in. starnut
will that fit in my buffs
 
F

fly

Member
im hoping to get bolts for my pegs and to lock my foldy 2night so when i do and it the pegs work ill post some pics
 
M

mynameisjaymez

Member
Okay. And i dont know about the star nut im not to knowledgeable in that section, I dont see why it wont work. i think the dimensions are the same. And Nick id like to see how those turn out for you.
 
F

fly

Member
well i got aluminuim bolts (all the local hardware store has) and i went for a double peg stall and both of the bolts bend up about 45 degrees. so now im going to wait until i go to home deport and get some titauim or steel bolt. o, i only made them come out one side because i couldn't figure out a design and i really will only grind on my right side
 
S

scooter27

Member
im like a super noob when it comes to micro scooters so what is the lengh from the back of the foldy thing to the front of the break because i want to try a sprite deck but i dont know if its to small for me
 
I

idk47

Steel Member
I just made a new a b foldy... anyone know some certain size plates or where i can take some off of to keep the foldy from ripping out? cuz i <3 this thing and i want it forever.
 
brandon kilbury

brandon kilbury

Super Moderator
Ian. said:
I just made a new a b foldy... anyone know some certain size plates or where i can take some off of to keep the foldy from ripping out? cuz i <3 this thing and i want it forever.
Click to expand...

put 2 B plates in their or a new a one, also have the foldy welded
 
Status
Not open for further replies.
Top