Question Thread. (Ask here if you havent searched)

Status
Not open for further replies.
D

dre

Member
angeLO. said:
HOW CAN I MAKE MY HEAD TUBE ANGLE 90DEG
Click to expand...
put a 1/4" bolt in the front and the 3/8" bolt behind the foldy. Or you can put the 3/8" behind and a 5/6" in the front hole by taking a 5/6 drill bit and just run it through the holes in the headtube that you stick the bolt in till it fits.
 
S

Steezeman

Administrator
About Micro Bullet wheels, those all black ones. I know the urethane is bigger, so do they work on stock Razor forks? I've heard they don't on SR forks, so what's the deal? My fork is already filed at the top for 125's, so that shouldn't be a problem.
 
C

c4scooters

Barspins
Bend your knees.. Lean back then extend your legs. Push forward a bit and if you want you can tuck in your legs (if you are jumping up a ledge or stair set).
 
F

fly

Member
ya w/o trying i can jump about 1 ft, and if i try about 18" or what ever a 2 set is, cus i stall on the one in my garage
 
I

idk47

Steel Member
Homemade one pieces cost like $22.00 shipped from online metals, and free welding. Then you're set.

Just ride stock, it's the best.
 
F

fly

Member
Gino Troian said:
@nickd: A 2 set is about 12 inches.
Click to expand...
not in my garage each stair is about 8 inches, cus i have a 12" tall mini bank i built w/ scraps and its lower than the 2nd stair but higher than the first, i know this because sometimes i but it up against the stairs to do mini stalls on the higher stairs
 
Status
Not open for further replies.
Top