Questions about oversized bars

[Bird is the Word]

So for oversized bars you have to have HIC, right? So then do you need a special oversized clamp for it or do you have to stretch it or can you keep it how it is? Are there any other different parts you need for oversized?

 

[Calvin]

you dont have too have just use hic with OS bars. you can use a proto or tilt scs as compression. or lucky makes a shim call UBA where you can use OS bars with ics or threaded.

 

[issac p]

you have 3 options.
-ride hic compression with an oversized clamp. i dont think you can stretch a standard clamp to an oversized clamp. you'll break the bolts.
-ride proto full scs or tilt scs. not the lt version
-get the lucky uba, use a oversized clamp, and ride threaded, ics, or ihc.

 

[GrantWood]

For the SCS (Proto Tilt) Make sure you don't have a slit if not, cut it off the SCS and compensate for most of the height.

 

[William Juniper]

you have 3 options.
-ride hic compression with an oversized clamp. i dont think you can stretch a standard clamp to an oversized clamp. you'll break the bolts.
-ride proto full scs or tilt scs. not the lt version
-get the lucky uba, use a oversized clamp, and ride threaded, ics, or ihc.

this^^

 

[scootmafia]

I rode my mgp batwings on ihc once, all i did was put a madd hic shim on and it worked