Reinforcing new pro model forks

[Platinum timmy]

So the new pro model forks are the tinyiest bit smaller then the old pro forks, so the perfect size t-tube reinforcment went down the drain, is there a scooter part thats will reinforce my new pro forks or if not what can i reinforce it with and where from?

 

[jonny scoot]

you can use a t tube with lots of tape OR 25mm dowll

 

[Platinum timmy]

The forks are SMALLER so the T-tube is a tiny bit to big for the forks

 

[coin]

get a smaller metal pole

 

[ryankeong]

handlebar and tape isnt the strongest but better than nothing

 

[Brian Boston]

Is it just a lip at the top of the fork tube? I thought i heard someone say that. If it is just put the reinforcement in from the bottom. Handle bar and tape doesn't really do anything.

 

[Steezeman]

If the forks are like new A 125 forks, then it's not just a lip at the top. But if it's different, do what Brian said. You can try to file down the lip if you want, too.

 

[Mike Montgomery]

i would just go to the hardware store and find the perfect pipe to fit.

 

[me1]

If there is a lip on both parts just cut the lip off. I would bet it is only taking off a few MM so it should really do anything to strength. You could also just get an SR fork.

 

[Mike Montgomery]

i would sand the lip down if i was you.

 

[Jake ODonnell]

i would just go to the hardware store and find the perfect pipe to fit.

 

[ben-pat-bro]

u do have 2 file the lip down because i snaped my forks and my razor pro t tube went in like normal so u no file it =]

 

[kyle199]

for the new forks u get a t tube and cut that little slit thing out then hammer it in and thay fit i just did it 2 days ago

 

[skavenger]

*yawnnn*

Nice bump man.

 

[D= its sam!!]

for the new forks u get a t tube and cut that little slit thing out then hammer it in and thay fit i just did it 2 days ago

read the dates of the thread man lol, this thrread waay old

 

[Steezeman]

*yawnnn*

Nice bump man.

I've been watching your signature for days.

 

[scootererwtf]

yer use one of the metal handlebars

 

[team_punishment]

^^ why do you have the kid who flips a wheelchair as your avatar?

 

[lloyd]

handlebar and tape isnt the strongest but better than nothing

wrapping tape around a metal reinforcement will not do ANYTHING. it will still break because the metal reinfocrements are not touching the inside of the fork, so its just wiggling around and putting on wheight