Rusted bolt.

[rimroxxrailer]

okay so heres my problem.. i just got a new old a deck and i was trying to seperate the deck from everything else so i could have my headset and bars and such but there is a rusted bold holding it together that is impossible to get out... ive almost tried like everything... ive beat the f**k out of it so many times.. it will barely budge. this is the 2nd time this has happened to me. does anyone have any ways, tricks, or tips to help get this out??.. i really need to get it out. =[


thanks <33

 

[gmonhollon]

wd-40 or a screwdriver and a hammer =D

 

[rimroxxrailer]

did... i banged on it for like and hour.
it moved like .37mm =D

 

[Dom]

Exactly which bolt are you talking about? Do you have a pic.

 

[gmonhollon]

well there might be an O ring on, if there is pop it off.

 

[rimroxxrailer]

nope theyre all gone.. and no i dont have a pic i lost my little cord thingy.. ut its the one like very bottom... it basically holds everything together...

maybe i just need to suck it up and stop being such a vagina about it?

 

[zakmak]

no not at all i have the same problem with older scooters i get



a few options

1.if it's possible take a saw to it
2.get a torch a little hand one and get it hot and do the hammer screwdriver thing.
3.take a drill, drill straight through the top of the bolt, do it big enough so it's the same size as the threads,
put the screwdriver on the side of the bolt and hit it off (this weakens the bolt very much)(or if the top of the bolt is gone hit straight through.)
4. get a new scooter(which no one likes to here)

 

[rimroxxrailer]

do u think it would help if i like soaked the bolted part of the deck in somethingg over night??..
if so what should i soak it in and how long do u think?..

 

[Arborigeni]

torch it for 30 seconds to a minute, the rust will flake and the bolt will expand and turn easier

 

[Eric Magray]

ummm if theres a spring connected to it then you need to take that off first, if its already gone then idk.

 

[rimroxxrailer]

yea i already had the spring off and everything.. thx thought guys i finally got it =D 2 hours of non stop hammering and wd-40 =] im torchless=[ ...

 

[gmonhollon]

good job

 

[Lil Steve]

ayayaya GJ!

 

[farmboy uk]

does torching it avyually work?

 

[fashow69]

no not at all i have the same problem with older scooters i get



a few options

1.if it's possible take a saw to it
2.get a torch a little hand one and get it hot and do the hammer screwdriver thing.
3.take a drill, drill straight through the top of the bolt, do it big enough so it's the same size as the threads,
put the screwdriver on the side of the bolt and hit it off (this weakens the bolt very much)(or if the top of the bolt is gone hit straight through.)
4. get a new scooter(which no one likes to here)

eff that i have two brand new pros. um to the kid that started this thread just add lots of wd40 or something and keep trying eventually it has to come out.