Scooter Axle + (4) Pegs

[Sebastian]

Ok, i asked many people what i should do, but i get no good answer so i opened up a thread.

So i got a Phoenix fork and deck and now i wanna install four pegs on my scooter.
Now i dont know what axle i need, could i use the ones from inward scooters?
(There is the problem that i live in Germany and inward dont ship international until 300$ minimum)

And the next thing is that idk what pegs i should get.
Luckys, Tilts or wait for the outcomming Blunts.

THX for help guys.

 

[Connzi machell]

umm idk about the axel problem, but definately tilt chromo pegs

 

[Kroto]

razor pro back axel and 2 tilt pegs should fit the pheonix fork, for the back go to like home depot and buy a longer bolt

 

[Sebastian]

More tips or instructions from user who ride four pegs?

 

[R-Dubya]

Razor axles are so shitty. I would never run one with pegs. Just buy a couple of the longer sizes of bolts from Inward or something, get two 3 inch and two 3 1/2 inch bolts, they're only like a dollar each.

 

[ConnorD]

pretty sure QCS just came out with a 4 peg axle, check it out

 

[Kyle]

Qcs has double peg bolts

 

[Sebastian]

Shure, but if i dont wanna run Qcs?
Do they fit other pegs?
And Inward is bad, cause i cant buy in Germany.

 

[Sebastian]

Somebody here who wanna buy the bolts and sell it for the same price to me?

 

[Sebastian]

Bump

 

[Micah.]

Just run qcs they have good pegs

 

[Victor C.]

yeah i have qcs pegs their amazing!

 

[Rob.]

...Or just buy a longer bolt from any hardware store..?

 

[Victor Saldarriaga]

what pegs are the best ? for just flat not grinding ???

 

[itzz_lukey]

tilt pegs are beastt

 

[Zach Hamrick]

Okay,
Tilt chromos are probably the best bet for riding four pegs,
Go to a local hardware store, ask for only threaded only axles,
Its an axle that is only threads on it, Then get two locknuts and locktite or locktite washers. Have them cut it to your correct size.
Then sockets are your only way to tighten the pegs which is the bad part.
I dont know the correct axle sizes or locknut sizes, just bring a bearing to measure if the bolt isnt too thick or to skinny.,
Hope i could help.

 

[iRideCrows]

I want to start riding 4 pegs. my idea is to ride your normal pegs but have a little bit longer axle & ride hardline pegs on the other side. just something I'm gonna try

 

[austincats]

what pegs are the best ? for just flat not grinding ???

uhm what........

 

[BenJelinek]

Razor axles are so shitty. I would never run one with pegs. Just buy a couple of the longer sizes of bolts from Inward or something, get two 3 inch and two 3 1/2 inch bolts, they're only like a dollar each.

Actually, i have some of the brand new ones and they have nylon on them so i used a rear axle and a spacer for my tilt chromo on my phoenix phorx and it works perfectly

 

[Victor Saldarriaga]

uhm what........

you dont know any thing about pegs.