brody01134
Steel Member
Qcs plastic pegs
-The first plastic scooter pegs on the market
-Made out of strong plastic for increased slipperyness
-Fully CNC machined out of a full block
-2 inches long, 1" diameter
-Designed with strength and performance in mind and slide extremely well on any ridable surface
-No modification to your scooter is necessary to install your pegs.
-Fits most types of forks: QCS, Senior, French ID, Lucky, Striker, stock razor, stock micro, stock JD Bug and many more.
-Compatible with most decks on the market
-By far the best sliding pegs in the industry!
-11,97$ CAD for one/ 22,97$ CAD a pair
-Includes all hardware necessary to ride your pegs!
available at www.qcscooters.com
Qcs original pegs
-The very first, custom freestyle scooter pegs ever made!
-Very light/strong desing.
-CNC machined professionally out of heat treated T6 aluminum
-2 inches long.
-Designed for easier grinds and slides.
-No modification to your scooter is necessary to install your pegs.
-Fits most types of forks: QCS, Senior, French ID, Lucky, Striker, stock razor, stock micro, stock JD Bug and many more. Not compatible with Inward forks, unfortunately.
-Fully compatible with all TSI decks!
-Hands down the best pegs in the industry!
-9,97$ CAD for one/ 17,97$ CAD a pair
-Includes all hardware necessary to ride your pegs!
available at www.qcscooters.com
tilt chromo pegs
Heat treated 4140 chromoly
1" x 2" (25mm x 51mm)
Black oxide finish
7.6 oz per set
Hardened axles & Nylon locking nuts
available at www.shopecx.com
Tilt park pegs
Heat treated 7075 aluminum
1" x 2" (25mm x 51mm)
Machined finish
5.6 oz per set
Hardened axles & nylon locking nuts
available at www.shopecx.com
inward scooter pegs
CNC Machined Aluminum peg. 2 inch long. Fits most forks and Inward Hybrid forks sold after 1/1/10. This peg does NOT fit Lucky (deck and forks), TSI, Inward Extreme and Zero Offset forks. Requires longer axle (sold separately). Sold per peg.
available at http://shop.inward-scooters.com/
hardline x pegs
HardLine xPegs are made out of 6061 solid aluminum (not aluminum tube) 2” long x 7/8” diameter with ½” taper on end to fit most all forks and decks. Comes with 4 different lengths of 8mm grade 8 socket head axles, 2 flat washers, and four (two per axle) wave lock washers. This will allow you use our pegs on almost all fork/deck combinations.
available at www.hardlinescooters.com/store
district scooter pegs
Manufactured and tested by the District team
Strong and lightweight
Comes with aluminium axles (or you can use your existing scooter axles)
available at http://www.scooterhut.com.au
swish pegs
Made from CNC high grade Aluminium
Length - 51mm (2 Inches)
Colour - Silver
No over parts needed, slots straight over standard axles
available at http://doggscooters.com/store
Lucky scooter pegs
aircraft aluminium
many colours
hardened axles and bolts
soa freestyle pegs
SOA V2 Freestyle Scooter Peg
Front Model 5.5cm Long
Rear Model 4.5c Long
New Higher Grade Alloy
Longer Product Life & Smoother Grinds from the New V2 Models
100% Australian Made Product
Full Peg set front Peg & Back
Full replacment Axles, Bolts & Washers
available at http://www.scooters-only.com/
Apex pegs
Made from Aircraft Grade Alumimium - Strong, Durable & Light.
A universial peg that works on both street & park.
These Pegs will fit most of the decks out there on
the market at the moment including:
TSI, Lucky, Phoenix, Razor,MGP & others.
The Pegs will most forks:
French ID, Lucky, Phoenix, Proto, DSA, Razor, MGP, etc
available at http://www.moonwalkscooters.com/
east 2 west pegs
•Fully CNC Machined and Anodized
•Made with aircraft grade T6061 Aluminum
•Available in chrome, red, black, purple and blue
•Dimensions: 1”x2” (25mm x 51mm)
• Includes hardened Axle Bolts and Grade 8 Nylon Locking Nuts
• Weight: 2 Oz.[/QUOTE]
blunt scooter pegs
. Blunt rider Aaron Bransdon signature pegs.
. 4130 heat treated chromoly outer sleeve.
. Anodized aluminum inner sleeve.
. Hardened steel axels and nylon lock nuts.
. Researched and tried to fit almost all scooter decks and forks on the market.
. 7 great colours to choose from; Blue, Green, Purple, Red, Silver, Gold, Pink.
if there are any more pegs that i did not include please leave a comment or pm me
-The first plastic scooter pegs on the market
-Made out of strong plastic for increased slipperyness
-Fully CNC machined out of a full block
-2 inches long, 1" diameter
-Designed with strength and performance in mind and slide extremely well on any ridable surface
-No modification to your scooter is necessary to install your pegs.
-Fits most types of forks: QCS, Senior, French ID, Lucky, Striker, stock razor, stock micro, stock JD Bug and many more.
-Compatible with most decks on the market
-By far the best sliding pegs in the industry!
-11,97$ CAD for one/ 22,97$ CAD a pair
-Includes all hardware necessary to ride your pegs!
available at www.qcscooters.com
Qcs original pegs
-The very first, custom freestyle scooter pegs ever made!
-Very light/strong desing.
-CNC machined professionally out of heat treated T6 aluminum
-2 inches long.
-Designed for easier grinds and slides.
-No modification to your scooter is necessary to install your pegs.
-Fits most types of forks: QCS, Senior, French ID, Lucky, Striker, stock razor, stock micro, stock JD Bug and many more. Not compatible with Inward forks, unfortunately.
-Fully compatible with all TSI decks!
-Hands down the best pegs in the industry!
-9,97$ CAD for one/ 17,97$ CAD a pair
-Includes all hardware necessary to ride your pegs!
available at www.qcscooters.com
tilt chromo pegs
Heat treated 4140 chromoly
1" x 2" (25mm x 51mm)
Black oxide finish
7.6 oz per set
Hardened axles & Nylon locking nuts
available at www.shopecx.com
Tilt park pegs
Heat treated 7075 aluminum
1" x 2" (25mm x 51mm)
Machined finish
5.6 oz per set
Hardened axles & nylon locking nuts
available at www.shopecx.com
inward scooter pegs
CNC Machined Aluminum peg. 2 inch long. Fits most forks and Inward Hybrid forks sold after 1/1/10. This peg does NOT fit Lucky (deck and forks), TSI, Inward Extreme and Zero Offset forks. Requires longer axle (sold separately). Sold per peg.
available at http://shop.inward-scooters.com/
hardline x pegs
HardLine xPegs are made out of 6061 solid aluminum (not aluminum tube) 2” long x 7/8” diameter with ½” taper on end to fit most all forks and decks. Comes with 4 different lengths of 8mm grade 8 socket head axles, 2 flat washers, and four (two per axle) wave lock washers. This will allow you use our pegs on almost all fork/deck combinations.
available at www.hardlinescooters.com/store
district scooter pegs
Manufactured and tested by the District team
Strong and lightweight
Comes with aluminium axles (or you can use your existing scooter axles)
available at http://www.scooterhut.com.au
swish pegs
Made from CNC high grade Aluminium
Length - 51mm (2 Inches)
Colour - Silver
No over parts needed, slots straight over standard axles
available at http://doggscooters.com/store
Lucky scooter pegs
aircraft aluminium
many colours
hardened axles and bolts
soa freestyle pegs
SOA V2 Freestyle Scooter Peg
Front Model 5.5cm Long
Rear Model 4.5c Long
New Higher Grade Alloy
Longer Product Life & Smoother Grinds from the New V2 Models
100% Australian Made Product
Full Peg set front Peg & Back
Full replacment Axles, Bolts & Washers
available at http://www.scooters-only.com/
Apex pegs
Made from Aircraft Grade Alumimium - Strong, Durable & Light.
A universial peg that works on both street & park.
These Pegs will fit most of the decks out there on
the market at the moment including:
TSI, Lucky, Phoenix, Razor,MGP & others.
The Pegs will most forks:
French ID, Lucky, Phoenix, Proto, DSA, Razor, MGP, etc
available at http://www.moonwalkscooters.com/
east 2 west pegs
•Fully CNC Machined and Anodized
•Made with aircraft grade T6061 Aluminum
•Available in chrome, red, black, purple and blue
•Dimensions: 1”x2” (25mm x 51mm)
• Includes hardened Axle Bolts and Grade 8 Nylon Locking Nuts
• Weight: 2 Oz.[/QUOTE]
blunt scooter pegs
. Blunt rider Aaron Bransdon signature pegs.
. 4130 heat treated chromoly outer sleeve.
. Anodized aluminum inner sleeve.
. Hardened steel axels and nylon lock nuts.
. Researched and tried to fit almost all scooter decks and forks on the market.
. 7 great colours to choose from; Blue, Green, Purple, Red, Silver, Gold, Pink.
if there are any more pegs that i did not include please leave a comment or pm me
