Scooter PEGS super thread

J

Joe Trainer

Member
mason buckley said:
hey im getting pegs soon and want to know what pegs will fit on an MGP Nitro and a Thom Cat fork
Click to expand...

We have the same scooter besides the fork, I just got my east2west pegs, the only downside is I have to file down the drop out to fit the peg. It won't fit on the stock nitro fork so I'm using my original SR fork which it fits perfectly. I'm not sure about the clearance for a thom cat fork but i just measured the peg and it's about 7/8ths of an inch wide. So measure the fork and if you have about 1/4 of an inch of space around the hole then east2west pegs will fit the fork and your deck (with a little sanding down). Otherwise, if you don't want to sand down, then just go with chromos.
 
brody01134

brody01134

Steel Member
east 2 west pegs and blunt pegs have been added. not too much info on blunt pegs though because they arent released yet
 
rwall1905

rwall1905

Member
you can make pegs with pro back axles and four old bearings you thread the bearings on the axle the put the peg on the front forks
 
Jon.

Jon.

Steel Member
atown shreddars said:
how are the district pegs i might buy a pear
Click to expand...

pear1.jpg

pears have nothing to do with district pegs.
 
K

Kieran Mayhew

Guest
Well typically you just put the peg on the threaded end of the axle. But for your phoenix fork you may need a different axle bolt because it may not work.
 
K

Kieran Mayhew

Guest
Erm I don't know what you mean. Phoenix forks come with different axles to other forks. And yes you can install 2 on one axle.
 
S

Sebastian

Member
And can you hive me a good peg?
It should be black or purple.
And when you go to InwardSc. you ll see at the peg parts that there are axels.
Is this what you (and i) mean?
 
You must log in or register to reply here.
Top