Scooter Trouble-shooting

[CodyChirichiello]

yeah i tried, it didnt do anything.

 

[Brian Boston]

Take the clamp off?

 

[Pete Pachota]

Use a hammer?

 

[DoubleYou]

yeah if they stuck all the way up flip it over and bash ur bars into the ground. if that doesnt work use a hammer for more force

 

[Matt Dibble]

lol i did that once but i was stupid and didnt realize that pin thing came out the front.. idk what its called.. its like gold and it comes out the whole when ur bars are all the way up.. rode like that for 2 days before i noticed... almost broke stuff when i brought the hammer into play

 

[CodyChirichiello]

Take the clamp off?

T-Tube[/b]- Ok. You will need an allen wrench. this is like the way Ryan said but its for people who dont have drills to drill it then bolt it. You loosen the the clamp and take it off. Put the screw back through the where it was and put the pice thats inside the clamp on the other side and tighten it as much as you can. Itll be nice and tight but you dont have to use a drill or anything and the clamp is now gone.

Fork
Shocks: Ok. You need two spare smaller axels. This is kind of like how Ryan said Josh Toy puts metal pipes in the shocks. Ok the shocks usually have the top cup the shock and the bottom cup. Remove the bottom cup and there will be a small hole. TaPut one of the ends of a small axel in the top cup the best you can and put the bottom of the axel on the small hole(itll be a tight fit) take the screw part of the bolt and put it through where the small hole is. Do that to both shock holder.

 

[CodyChirichiello]

ok i have a question. well i bolted my scooter but i didnt switch around the bolt i just put an axel in the folding area, but how do you get those little metal circles off the ends of the bolt? ive tried a lot and i just cant do it

 

[VillageFox]

try a skinny flat head screwdriver.if that dont work try some plyers ..those things are annoying,lol. i had to take them out of like 4 scooters this weeks.

<span class='smallblacktext'>[ Edited Wed Sep 21 2005, 02:53PM ]</span>

 

[CodyChirichiello]

i was trying a flat head SD for a while but ill try again

 

[whoopa]

nvm
<span class='smallblacktext'>[ Edited Wed Sep 21 2005, 02:55PM ]</span>

 

[whoopa]

dub post god im fucking up... sorry
<span class='smallblacktext'>[ Edited Wed Sep 21 2005, 02:55PM ]</span>

 

[CodyChirichiello]

ok i just cant get that stupid piece of metal off and its pissing me off

 

[VillageFox]

what? did you chip off like half of it and can get the rest off? take to flatheads and push on both ends of the metal clip at the same time(if thats what your talking about).

 

[Jonny]

i just took a hammer and screw driver and beat the shit outta the tthing till it broke off

 

[VillageFox]

haha......i hate them. when i put the real bolts in mine i use bearing for spacers, and when i was done locking the mech like 2 mins later one of the bearing like exploded and shot across the room and almost hit my dog,lol

 

[CodyChirichiello]

ok ill try your two screwdriver idea

 

[Isaac Coy]

bump

 

[tarrymonz]

hahahaha

 

[Rob.]

Are you asking to be banned?