Serjey Noga Signature Deck!

[serjey]

Whats up guys! So here in the next couple of weeks or months I will be coming out with a Signature Deck. It will be a TSI Threshold 20.25" long and 4.5" wide. It will also be compatible with 125mm wheels.
I would like to get some thoughts, opinions, comments, and recommendations on what you guys think. Thanks!

 

[issac p]

Tsi should do graphics on sig decks. That would be badass.

 

[James Gonzales]

Agree with issac

 

[Robert]

You should take the 20 long as your deck, and make the standard 19.5.

 

[toddjamin]

sounds awesome serjey. i would like it wider, but that means changing extrusions so not really doable, but 125 is rad!

 

[Foster]

 

[Im A Ninja :)]

Headtube cut outs!!

 

[Robert]

Headtube cut outs!!

Headtube cutouts are so over rated.

 

[Im A Ninja :)]

Headtube cutouts are so over rated.

Some people like shit to look fancy, they should do a cut out saying tsi in the front.

 

[Robert]

Some people like shit to look fancy, they should do a cut out saying tsi in the front.

It costs a lot more than you think to do that.

 

[Im A Ninja :)]

It costs a lot more than you think to do that.

They did it on the TSI flight so i dont see whats the problem

 

[Robert]

They did it on the TSI flight so i dont see whats the problem

And they made slim to no money off them.

 

[Hunter Treviranus]

And they made slim to no money off them.

because it felt like a skateboard

 

[D ∆ V I D]

make the deck how you want it. thresholds are nice its the dimensions that are unique to you, making it your signature.

 

[Madis]

Yea man, as for the dimensions, don't listen to any of us. Just get it made the way you want. I assume the 125mm-compatibility comes from the Flexfender SX since it has those longer holes to adjust the fender's distance from the wheel?

 

[Robert]

Yea man, as for the dimensions, don't listen to any of us. Just get it made the way you want. I assume the 125mm-compatibility comes from the Flexfender SX since it has those longer holes to adjust the fender's distance from the wheel?

The sx still wont fit 125's because of the deck, so they have to cut it back more to fit bigger wheels.

 

[Snow Patrol]

Stoked to see Serjey back in it!

 

[JCott]

125 wheels would be sick! but i would recommend making it a little longer so you still have foot room with 125's

 

[Dybeck]

A fixed or half fixed fender would be unique, and if you had a signature color or finish of your choice

 

[Madis]

The sx still wont fit 125's because of the deck, so they have to cut it back more to fit bigger wheels.

nah, the fender is high enough that if you cut the dropouts a little longer, then the same fender will fit. What Matt used to do with Kukk Kruiser decks was that he just drilled the fender holes a little closer to the center, thus shifting the fender to make room for a 125mm wheel, but essentially used the same fender that was meant for 110mm wheels because it was high enough to fit 125s. If that made any sense.