Shim stuck in scs help asap!

[Chase Marsh.]

Omg i got my shim stuck in my scs cause i accidentally put the shim in before proto sign. I need URGENT help.

 

[Joey Wallace]

Take out your top bolt and put in in the THREADED side. not all the way in tho, then put a penny inside the middle of the scs and tighten the bolt onto the penny, this will stretch out your scs letting you remove the shim, Hope this helped brahh.

 

[TUC]

Take out your top bolt and put in in the THREADED side. not all the way in tho, then put a penny inside the middle of the scs and tighten the bolt onto the penny, this will stretch out your scs letting you remove the shim, Hope this helped brahh.

yeah do it with all the bolts though so as to stretch it evenly...

 

[Chase Marsh.]

I got it out. Penny trick didn't work. Thanks though.

 

[KNOX LOCAL]

lock.

 

[oskar911]

how did u remove it with out using the penny trick

 

[oskar911]

plz reply coz i did the same thing and the penny trick didnt work plz help

 

[Joey Wallace]

plz reply coz i did the same thing and the penny trick didnt work plz help

hoiw did it not help? just put your two thumbs in the middle and pull outwards on the shim while pulling up and twist a little bit and it should come out

 

[devinthedew2]

put your bolt in the opposite way and put a penny in the middle of the scs keep on screwing it in intill it reaches the penny and stretches the scs

 

[oskar911]

do u put the coin in like its the proto sign

 

[oskar911]

what coin do u use

 

[oskar911]

how did chase marsh do it coz i dont want to risk damaging the scs

 

[Stackies]

maybe he pryed it open with 2 screw drivers, All 5 of your post in one thread And in a triple post come on.

 

[Joey Wallace]

do u put the coin in like its the proto sign

no you put it in the slit part dude thatll make the scs stretch you wont damage the scs

 

[oskar911]

none the australian coins fit and prying it open doesnt work

 

[oskar911]

coin trick didnt work any other ideas

 

[KNOX LOCAL]

australian coins work fine, just use a 10 cent piece

 

[Rob.]

oscar stop triple posting or im going to slap you

 

[ConnorD]

none the australian coins fit and prying it open doesnt work

omg. take the bolts out of your SCS, put them into the opposite side (so they thread in) and put a coin or two in the slit. Tighten it and it will loosen the SCS.

 

[yoyoflavored]

^^^ so when you tighten the bolts they push against the coin in the slit.

just adding to what connor said