socket pegs

[Jacobo]

is ther a specific diameter for the axle?

 

[Jacobo]

badumpityyyyyyyyyyyyyyyy

 

[Jacobo]

wtf

 

[Maz.]

Diameter?? No the diameter will be the same. Just get a bolt to use as an axel that is half an inch longer than your standard axel.

 

[Jacobo]

k thx

 

[Maz.]

but with an mgp you will like have to experiment on how many washers you need to put on to make it work

 

[Nick Griffin <3]

Pegs are shit after about a day. They get boring. I got tilts for my mgp and i had to use washers for it to wotk properly. Just saying i used them once and took them off the next day.

not at all if your good.

 

[Maz.]

They just allways catch and it gets annoying... just my opinion

 

[Jacobo]

so u guys are sayin
13mm deep.
axle 1/2" longer than what im running
? amount of washers

also what do u mean by deep?
also should it be tapered?(like http://samhardware.com/sockets/385-deep-socket-13mm-x-12pt-x-12-.html )

can some1 post a link pllz

 

[Mikey G]

they should look like that.

edit: http://www.mytoolstore.com/wilmar/prod018.html#w765-12 All the shiz you need. scroll down to deep socket 13mm

 

[Jacobo]

k so no "taper" on it
(wouldnt it work though)cuz most companies who make pegs have ther "tapered" design

 

[Mikey G]

That taper is far too large. The only reason for tapered pegs is so they fit in the small cutouts for axles in forks.

 

[instinctscooter]

is the size the length? on the website above

 

[Mikey G]

the size is the inner diameter of the socket, like the part that you put over the nut.

 

[Jacobo]

in your pic... would the nut go inside the socket?

 

[Mikey G]

Yes, you would put the axle through socket, then the nut, being smaller than the actual socket, would be able to tighten onto the axle.

 

[Jacobo]

thx a ton huge help

so just to make sure the axle shud be 1/2 in longer than what i have?

i haven a mgp

 

[Mikey G]

that should be good enough.

 

[instinctscooter]

the size is the inner diameter of the socket, like the part that you put over the nut.

so the length of the bit u grind on lol?

 

[Jacobo]

on that would be the outer diameter
if u look at the pik mikey posted on this pg. u see a hexagon on the inside of the peg. thats the inner diameter

btw most scooter pegs are 2 in long