Standard clamp on oversized bars

[Sam Bennett]

Hey guys, is there anyway a standard clamp can fit oversized bars, please help me.

 

[-Sal-]

yeah you gotta do the penny trick and stretch the clamp.
take the bolts out of your clamp and put them in on the opposite side that they are normally, then put a penny on the inside of the clamp so the bolt does not go through the hole. if you keep on tightening the bolt it will eventually stretch out enough for you to fit oversized bars in it.

 

[702_dialed_rider]

you will need longer bolts also but just buy a district clam hella cheap 15

 

[Sam Bennett]

yeah you gotta do the penny trick and stretch the clamp.
take the bolts out of your clamp and put them in on the opposite side that they are normally, then put a penny on the inside of the clamp so the bolt does not go through the hole. if you keep on tightening the bolt it will eventually stretch out enough for you to fit oversized bars in it.

Is there a picture tutorial or something more detailed for this

 

[Juan.]

Is there a picture tutorial or something more detailed for this

http://www.youtube.com/watch?v=33ivfHyaJq0

 

[iliveinahouse1]

why can't you just buy a new clamp

 

[Sam Bennett]

Because I activated my retard mode and accidently bought a standard clamp already