stans smirnoff bars

[lh-choubi]

hello, i'm french and i would like to know which size of stan smirnoff rad bars can come with a french id fork, a french id clamp and the french id compression syst�©me

 

[Joe Manson]

These Ones

these will fit with french id compression and fork, not sure if the french id clamps work though.

 

[lh-choubi]

it'snot these : http://www.radskootco.com/content-product_info/product_id-1878/rad_vultures_1_3_8_hic.html

 

[Zaηe]

lock

 

[Joe Manson]

it'snot these : http://www.radskootco.com/content-product_info/product_id-1878/rad_vultures_1_3_8_hic.html

they are his width, but they are 1-3/8 for rad compression system

 

[lh-choubi]

ok thx lock please

 

[coryM]

1-3/8" works with frenchid fork. and you wont have to buy a frid compression at all (HIC means the compression is integrated with the bars). And get a 1-3/8" clamp.

1-1/4" will work with a frenchid fork and a french id compression and will need a 1-1/4" clamp.

I think the FrID clamp comes in 1-3/8" and 1-1/4" but am not positive.

 

[sax]

1-3/8" works with frenchid fork. and you wont have to buy a frid compression at all (HIC means the compression is integrated with the bars). And get a 1-3/8" clamp.
1-1/4" will work with a frenchid fork and a french id compression and will need a 1-1/4" clamp.

I think the FrID clamp comes in 1-3/8" and 1-1/4" but am not positive.

will a 1-3/8" clamp fit BUFFS w/out stretching?

 

[Mr. Proto]

1-3/8" works with frenchid fork. and you wont have to buy a frid compression at all (HIC means the compression is integrated with the bars). And get a 1-3/8" clamp.
1-1/4" will work with a frenchid fork and a french id compression and will need a 1-1/4" clamp.

I think the FrID clamp comes in 1-3/8" and 1-1/4" but am not positive.

will a 1-3/8" clamp fit BUFFS w/out stretching?

I think the FrID clamp comes in 1-3/8" and 1-1/4" but am not positive.

1-3/8" only. PROTO - Half Knuckles are the only clamp compatible with both sizes.

And yes, 1-3/8" fits BUFFs.

 

[coryM]

Yeah proto half knucks are where its at for sure.

That or make a shim for a frid or stretch promod.
Half knucks are much more dialed than both those options though by far haha