Star nut in my bars

[Bymy]

okay so just recently i broke my inward tees so now they are shorter but i want to re sell them but a star nut is in the way is there a way to take it out?

 

[Frank T]

sorry not sure but how did your tees break i have them as well

 

[Carson .]

Drill it out

 

[btyczki21]

or push it higher up so you can put a new one in.

i have one set of bars with 3 starnuts in them lol

 

[Carson .]

eh drilling is easy.

 

[Joey Wallace]

i take a flathead screwdriver and hammer one side of the starnut down so that it gets sideways in your bars then hit your bars on the ground a few times and it should come closer then get needle nose pliers and yank it out.

 

[Bymy]

sorry not sure but how did your tees break i have them as well

um i dropped in and they just snapped

i take a flathead screwdriver and hammer one side of the starnut down so that it gets sideways in your bars then hit your bars on the ground a few times and it should come closer then get needle nose pliers and yank it out.

thanks

 

[CollinDonnelly95]

put your ics bolt in the wiggle as far side to side as you can all the way around it will bend it in and it should slide out