Starting Again

F

Fearliss

Member
So hey what's up?
Kind of a welcome post for me. 16 years old in USA, Arizona. Used to ride a couple years back but quit when I moved because there was / is no skatepark where I live. Didn't have much money so just owned a stock razor A. Still don't have much money but wanted to get back into riding and didn't want to use my old A stock anymore. So I figured I'd do some street riding because of the skatepark situation and pick me up a new scooter. I've been researching everything but the problem is I still don't have much money.

So here's my plan. Save my old A for spare parts I might need and buy a ultra pro. Then use whatever I have left and earn to just upgrade the pro part by part.

What parts would I need upgraded first if I took this route? And what are some cheap modifications I can do to the ultra pro as a diy project?

Well more information, I'm not that good. Probably beginner status anyway. But I have to learn and what better way to learn then gaining information and just going for it and learning more.

So thanks for your replies ahead of time. Hope to get riding soon.
 
J

Jacek

Member
the ultra pro is all u need. no mods are really required like with a pro model. u COULD change the grips or griptape but its not absolutely necessary
 
F

Fearliss

Member
Sounds pretty good. If I were to start upgrading it in the near future, what parts would I want to go with first? Sorry if all this sounds like everyone elses post. I actually do research before and after posting though. So we are all good.
 
K

KNOX LOCAL

Member
make sure when buying the ultra, to get the one with higher and wider bars, so you can cut them down to your preffered height. and ultra wheels are surprisingly strong so you shouldnt brake them for a couple months
 
Zaηe

Zaηe

Keepin' Peace
Staff member
Hot glue your pro wheels (search for that one).
Do what knox said, get the one with bigger bars so you can cut them to a preferable height.
New grips.
New griptape, stock sucks.

Maybe a new sealed BMX headset if your stock is giving you the shits.
 
nitroRCs

nitroRCs

Member
Zaηe said:
Hot glue your pro wheels (search for that one).
Do what knox said, get the one with bigger bars so you can cut them to a preferable height.
New grips.
New griptape, stock sucks.

Maybe a new sealed BMX headset if your stock is giving you the shits.
Click to expand...
This.
 
guzzyscoots

guzzyscoots

Bronze member
all u need with the ultra pro is maybe wheels if u get really good and u deffffssss need new griptape, the ultra pro griptape wears out in a day !
 
scooterkillkidphil

scooterkillkidphil

Steel Member
Like Zane said, Hot Glue your wheels. Basically what you do is tape one side of the wheel and then fill all the spots with hot glue annd the shave all the excess coming out. That will basically reinforce your wheels.

Cut your brake. About half way. It helps alot.

New Grips and griptape is good.

Basically all you nneed to do if your getting ann ultra pro for now. Whe you start riding harder buy aftermarket parts
 
You must log in or register to reply here.
Top