Stock fork and wheel

[Espo]

I have a stock razor A fork I believe, and I want to put at 115mm wheel on it but it wont fit is there any way I can get it on without getting a new fork?

 

[natethegreat]

nope

 

[Humma]

yes there is you idiot.

file the forktube enbetween the legs.

 

[konowaluk]

fuckk that its not worth all that just use a 110

 

[natethegreat]

its a stock fork right i could be wrong but there is the whole with plastic thing it.. well there was in mine. so it would be a hassle to file dont waste your time ^^ just use a 110

 

[Joe Riley]

you guys are rude assholes, at least answer his question. if he wants to ride a 115mm wheel then let him.

grind down the fork tube between the legs about 3-4mm and it should fit.

 

[science19]

why dont you put it on your back first wear it down and switch it after

 

[Espo]

i did and its pretty worn down but Its still to big so the whole in the bearing is not inline with the whole in the fork so the axle wont fit

 

[JonnyJonDogg]

yes there is you idiot.

file the forktube enbetween the legs.

do that or...
ride your wheel in back and wear it down lol
or grind the urethane(i do it allll the time to get rid of flat spots <33)

 

[mike912899]

yes there is you idiot.

file the forktube enbetween the legs.

no just no......... u can just fit 110s with the cap off, but i don't think you can fit 115.... if you do file it down it will weaken the welds

 

[science19]

jsut fuck the wheel and go to 110

 

[Joe Riley]

jsut fuck the wheel and go to 110

dont be an a$$
give him a solution, dont tell him to go buy another wheel.

like jondogg said, grind down the wheel.
or grind the fork tube in between the legs.

thats pretty much all you can do besides riding it in back for a while.