taking off pro model foldey

B

Brian Boston

I got myself banned.
Take all the bolts out from underneath of it, than use a hacksaw to cut the welds so you can separate the mech from the deck.
 
J

jeff26

Member
if you cut the welds of the pro model foldy, you can still bolt it back on, it will just be weaker in that area. i rode an unwelded deck for a while and never had problems.
 
B

Brian Boston

I got myself banned.
To put it on a new A you need to drill 4 holes, you can line them up with the plate from underneath the mech. Theres a video of this in the scooter modding super thread, check it out. If your trying to put it on an old A, people have said they have done it but i never saw pictures, and it doesn't look possible. You would have to weld it on.
 
P

Punkfish

Member
Brian Boston said:
To put it on a new A you need to drill 4 holes, you can line them up with the plate from underneath the mech. Theres a video of this in the scooter modding super thread, check it out. If your trying to put it on an old A, people have said they have done it but i never saw pictures, and it doesn't look possible. You would have to weld it on.
Click to expand...
It wouldn't work out good at all, Old A's are threadless unlike Bs or Pros.
 
You must log in or register to reply here.
Top