tilt pegs on lucky smx

[jj123]

i wanna run a tilt chromo peg on my lucky smx will they work fine or will i need a spacer and can i use a stock back razor axel for that peg thanks

 

[BrandonWeir]

Stock back axle would work fine, might need to use a wheel or bearing spacer but that's no big deal. There will probably be a little bit of interference with the fork but just take a round file and grind the fork down a little bit if there is. You could also use a spacer which is what I would do because my front peg doesn't take much impact.

 

[jj123]

thanks