tilt pegs question

[scoodeeni]

do the pegs fit on inward 0 offset forks.the old one not hybrids

 

[Randall Dalal]

No they do not, because quebec scooter pegs do not fit any of the inward forks.

This peg does NOT fit Inward Extreme, Zero Offset and Hybrid fork.

^ ( Taken from inward site ) ^

And the tilt scooter pegs are a 3rd of an inch diameter, while the quebecs are .82 of an inch and those are just about the same.



However if you got something like a longer axle to lengthen the peg away from your fork you might be able to pull it off.

 

[Matt Rittler]

if u really wanted to to couldnt u just cut down the fork on the side u wnat it on ????

 

[keons5]

I tried to send you a PM, but your inbox is full. I am not sure, but I do not think the pegs would fit. To be certain, you can measure the inside width of the fork tubes at the location of the front axle. The outer diameter of the pegs is 3/4", so they need at least that distance to fit.

 

[Michael Rankin]

or you could just put a spacer on it so that the peg just barely clears the fork leg. just a suggestion

 

[scoodeeni]

okay thanks ill use the spacer thing lock thread