TSI Thom Cat Fork ICS Help!

Sc00t3rin

Sc00t3rin

Member
I waz wondering if i can use am ICS system on the forks.....but one of my friends waz saying that u can use an ICS, but u have to get the REDNECK ICS on instead from inward scooters..............Plz help me out! :)
 
Z

Zach Schilling

Member
I wanted to go ICS with my thom cat but I heard the welds get in the way of the cap. It also comes with and oversized starnut installed for SCS or HIC (or at least mine did.) I would suggest going with HIC like I did but you need oversized 1 3/8" bars (Like RADS.) Or if you have the money get brass knuckles as SCS.
 
Sc00t3rin

Sc00t3rin

Member
Zach Schilling said:
I wanted to go ICS with my thom cat but I heard the welds get in the way of the cap. It also comes with and oversized starnut installed for SCS or HIC (or at least mine did.) I would suggest going with HIC like I did but you need oversized 1 3/8" bars (Like RADS.) Or if you have the money get brass knuckles as SCS.
Click to expand...

yay i know but one of my friends said that the redneck compression system should work, and what an HIC, and do they work that same as ICS!?
 
Z

Zach Schilling

Member
I don't know what the difference is between regular ICS and Red Neck ICS is. But, HIC is pretty nice. You need: threadless fork, oversized 1 3/8" bars, threadless headset, starnut, and HIC shim. You have the starnut in the forktube about 1/2" down, you put your headset on and put the fork though the headtube. Then, take the HIC shim that you get from RAD or make your own, and slide it over your fork tube. Then stick on the top cap for HIC over the forktube. I suggest using the one you get with your headset. Put the compression bolt in, tighten, and put bars on and clamp it together. Then Enjoy.
 
Sc00t3rin

Sc00t3rin

Member
Zach Schilling said:
I don't know what the difference is between regular ICS and Red Neck ICS is. But, HIC is pretty nice. You need: threadless fork, oversized 1 3/8" bars, threadless headset, starnut, and HIC shim. You have the starnut in the forktube about 1/2" down, you put your headset on and put the fork though the headtube. Then, take the HIC shim that you get from RAD or make your own, and slide it over your fork tube. Then stick on the top cap for HIC over the forktube. I suggest using the one you get with your headset. Put the compression bolt in, tighten, and put bars on and clamp it together. Then Enjoy.
Click to expand...

yay HIC is pretty weird but do u know of being able to use an ICS in it!?
 
Rob.

Rob.

Admin
Staff member
Redneck ICS works with every fork available. It's just a bit more of a hassle? Than other compression systems
 
Thom Cat

Thom Cat

Silver Member
I recomend these two compression systems,
HIC-1.jpg
 
Kc Corning

Kc Corning

Bronze member
ICS is worthless. It's an obsolete compression system. I don't see why you would waste your time when your looking at two of the most modern and most effective compression systems to date.
 
You must log in or register to reply here.
Top