Ultra Pro Model

[Jason]

Good thing we can buy aftermarket forks then.

 

[redline582]

I reckon its just gonna turn out to be another fail by razor.

 

[Chandler Hab]

bump

 

[JamieBowe]

Sooo stoked, Reinforce the fk out of the deck and it should be magic, Would it put more pressure one the spear head and make it snap (where the foldy used to be)

 

[devinthedew]

Can you use dsa deck savers with this deck.

 

[Josh Herman]

Can you use dsa deck savers with this deck.

No

 

[alex Dorantes]

its gonna need reenfocments this one is bent

 

[dezbert]

Ight.

And you can file the forks down to fit 110 wheels...because the forks are legit

 

[jare88]

Can you use dsa deck savers with this deck.

No

^ i'm pretty sure that' right. on the picture a couple posts above there aren't any screws that are normally there to hold the metal plates tht are under the foldy on the normal pro. But it probably wouldn't be too hard to drill holes. Of course, im not sure how big the deck is, and you probab;y wont be able to know for sure until it comes out. but it still wouldnt be that hard to drill in a hole in the front to hol strip reos on the side of the deck. hopefully it wont be necessary though, I just want to ride at least one before i make any critiques.

 

[Chandler Hab]

its gonna need reenfocments this one is bent

wait what kind of reinforcments? i wasnt paying attention.

 

[Chandler Hab]

its gonna need reenfocments this one is bent

wait what kind of reinforcments? i wasnt paying attention.

 

[scoot13]

i wouldent wait until the razor ultra just get a tsi

 

[Steezeman]

To reinforce it you would just do that same as you normally do on the back, but just drill all the way through the front and put a back axle/bolt through there. And if you drilled through the neck that goes through the deck, it might even help reinforce that a little bit.

 

[brinddy]

dont like the bars at all.
an the 1 piece deck shit.

 

[dylancrower]

i think they look good but some reinforcements couldnt hurt

 

[thescooterkid]

headtube looks shifty. deck is really light though, 2lbs 5 ounces (9 ounces lighter than razor pro). and it comes more reinforced around back dropouts compared to razor pro. http://shop.inward-scooters.com/images/std-pro-ultra-back.jpg

 

[Steezeman]

Yeah dude, the deck is mad light. Especially considering when people weigh Pro decks it's just the deck, meaning you have to add the headtube and bolts. So really, the deck is super extra light. You can throw it around in the air so easily.

 

[devinthedew]

Yea the ultra pro is really light and whips are eaiser than ever.

 

[Aaron]

DSA decksavers WILL be available for this deck asap.
You'll just need to drill the holes in the front of the deck, using the decksaver as a guide.

 

[devinthedew]

That would be legit!