VNC compression

[jtom2343]

um i still don't get this, bars slide into the clamp part?

 

[Brandon Miller]

do we have to live in washington to be on team?

there is no real "team" we are just like represenatives who test, make and create ideas for parts. but in the future once things get going smother and all that then we will most likely start to sponsor people. we are only like 3 days old

 

[Taylor_Davis]

well 3 days plus stuff before then but that was just for our selves

 

[Kc Corning]

.

 

[Taylor_Davis]

This is not a part we got from some bike we actually built these compression pieces kc you'll see it this weekend at tron I'm going with cooper and them and getting a TSI deck

 

[stefetrucki]

This Compression is copied from ME

http://team-s5.bplaced.com/shops5/product_info.php?products_id=107

 

[GoGzS]

http://team-s5.bplaced.com/shops5/product_info.php?products_id=77

Please don't start things like this...just couse of the reason in the link above...

 

[Taylor_Davis]

i have never even seen your compression before. that one looks more like the compression you buy for bikes or the riser thing kc was talking about.

 

[jtom2343]

um i still don't get this, bars slide into the clamp part?

anyone wanna help me out?

 

[GoGzS]

um i still don't get this, bars slide into the clamp part?

anyone wanna help me out?

Always...
Quoting myself from another thread...

The picture should explane the compression system...
The clamp part works like a RAD HIC, but you don't need oversized bars since it shrinks to 1 1/8" a.k.a. fork tube size, so you clamp your bars on that part...
Seriously...I love the idea...nice job on it...

Pretty much...
First you put a starnut in your fork, then the compression system on it, screw the compression bolt in the starnut and tighten it...tighten the clamp itself...then put bars on it (the 1 1/8" smaller diameter part) and tighten your barts on the compression system...
Dank, simple as RAD, hope the welding is done nice tho, so it won't break...
I see few flaws in it, but I still love the idea...

 

[jtom2343]

so you have the compression w/ integrated clamp plus another clamp for your bars above that? seems like that wouldn't look very clean

anyone have a pic of it fully set up with bars on and everything?

 

[Taylor_Davis]

I will have a picture up on the website tonight I hope but it looks super clean if you have our bars on it. It will look just fine trust me.