WANT:bars or BUFFs

Tristan Mathews

Tristan Mathews

Member
dude if you have a seat-post most bars are going to have a diameter of 25mm altogether, Ok, so go to your local aluminuim, chrome, Titanium or w/e distributor ask the person at the counter if they have any material that is 25mm diameter and ask for the length you want it in i recommend probably get 25 inch bars. I say this even though some people would disagree because you can then keep cutting your bars down to your comfortable length.

PS. you might want to ask for thicker walls or get another tube put that one through the outer tube and then bolt it. I'd do this because most of my aluminuim bent after like less then a week.

PSS. It will usually cost you about $3aus or less which is probably 2$


so yerrrrrr
 
J

jeff26

Member
Tristan Mathews said:
dude if you have a seat-post most bars are going to have a diameter of 25mm altogether, Ok, so go to your local aluminuim, chrome, Titanium or w/e distributor ask the person at the counter if they have any material that is 25mm diameter and ask for the length you want it in i recommend probably get 25 inch bars. I say this even though some people would disagree because you can then keep cutting your bars down to your comfortable length.

PS. you might want to ask for thicker walls or get another tube put that one through the outer tube and then bolt it. I'd do this because most of my aluminuim bent after like less then a week.

PSS. It will usually cost you about $3aus or less which is probably 2$


so yerrrrrr
Click to expand...

25 mm is like 1 inch. too thick. stock bars are 22.225. but 19.05 will work fine too. so you want something in between those.
 
B

Bruxxelles

Member
alrite, thanks guys. what if i just got a metal piece? im just not too into the hella wide bars, ive ridden them and i dont like them, so i think like 15s maybe. i also have animal barends so im looking to be able to fit those in there.

so metal bar piece??
 
You must log in or register to reply here.
Top