Wee Simplex Bars?

Ryan Upchurch

Ryan Upchurch

Member
i have wees for sale for real cheap right now. they were part of the first batch of v3's i think. Were originally powdercoated white, but now reside at a flat black. 18 high, 13 wide. heres the thread. http://www.scooterresource.com/forum/showthread.php?t=37165

edit: i think theyre great bars. I never had a problem. I just grew and they became to small for me. Hopefully they fit someone on here cuz im saving for crow bars, and my bars right now are broke.
 
S

ScoOter_ChilLa

Member
outerdiameter stands on the weescooters side... so whats the inner diameter of steertube, and whats the inner diameter of the tube where the grips are on?

so :

steertube inner diameter : ???
other tube(where the grips are on) inner diameter : ???

pls answer in mm
 
S

ScoOter_ChilLa

Member
Steertube inner diameter : ???
Steertube outer diameter: ???

Crossbar inner diameter : ???
Crossbar outer diameter : 22mm

please say that where a "?" is.

sorry for bad english ^^
 
GoGzS

GoGzS

Bronze member
ScoOter_ChilLa said:
Steertube inner diameter : ???
Steertube outer diameter: ???

Crossbar inner diameter : ???
Crossbar outer diameter : 22mm

please say that where a "?" is.

sorry for bad english ^^
Click to expand...

Holy fuck man...ok it's this simple...

If you want a steertube to fit, it has to be 1 1/8" inner diameter, since that is the outer diameter for the fork... that would be 28.57500 and that's what the guy in the selling thread already said, not this precise tho...
Now if Madis told you it's 2.1 thick, do the calculations...outer diameter is ID+2xthickness = 32.775 mm
Again, that's pretty much what Ryan told you, just less precise...

Now let's say the 22mm OD for the crossbar is correct, the ID is then 17.8mm if we again use Madis 2.1mm wall thickness...

It's not so hard, you just gotta do some basic math...
 
Madis

Madis

Super Geek
Staff member
GoGzS said:
Holy fuck man...ok it's this simple...

If you want a steertube to fit, it has to be 1 1/8" inner diameter, since that is the outer diameter for the fork... that would be 28.57500 and that's what the guy in the selling thread already said, not this precise tho...
Now if Madis told you it's 2.1 thick, do the calculations...outer diameter is ID+2xthickness = 32.775 mm
Again, that's pretty much what Ryan told you, just less precise...

Now let's say the 22mm OD for the crossbar is correct, the ID is then 17.8mm if we again use Madis 2.1mm wall thickness...

It's not so hard, you just gotta do some basic math...
Click to expand...

No dude, I meant the cross bar is 2.1mm thick.
The steertube's OD is 1-1/4" and it fits on forks, so you do the math.


But seriously scooter chilla, if you want to make bars, there are plenty of threads on SR to search information from. If you don't want to search or maths are too complicated, just buy some.
 
C

chester

Member
if crossbar is 2.1mm thick u can't use nylon barends, can u? cus i have crossbar 2mm thick and i cant fit my fly nylon barends, they fit shadow conspiracy alu barends though
 
S

ScoOter_ChilLa

Member
dont works i thing...

@madis: how much cost shipping when i only buy the PROTO ICS (FrenchID-compatible) compression system?

or can you make little cheaper?^^
 
Remco

Remco

Member
a crossbar is exactly 22.2mm. If the wallthickness is about 2.1mm the ID is 22.2-(2x2.1)= 18mm

Almost any bmx barend will fit in there. (the pressfit barends are a bit hard to get in, but just use a hammer.)
 
You must log in or register to reply here.
Top