Were to get compression bolt?

[DBLWhip40]

Yo were can i get a compression bolt besides in the SR store cuz i wanna get like 2 day shipping and i dont wanna wait 2-3 weeks for the sr store, thanks

 

[proscooter46]

inward-scooters.com

 

[DBLWhip40]

i know about inward scooters, i need a compression bolt for a starnut

 

[Humma]

home depot, find one that fits.

 

[idk47]

http://www.boltdepot.com/product.aspx?cc=13&cs=71&cm=25&cd=1222

Last row in the box at the bottom, type 1 in the box and checkout.

 

[dre]

If you still can't find one or you're poor, go to home depot, find a threaded rod that fits, cut it to size, and jb weld a nut onto the end so you can tighten it.

 

[AnthonyPellino]

Ian NO. It's m6 and they don't make m6 bolts 8 inches long. Get a threaded rod and weld a nut at the end or order a compression bolt through SR because I looked everywhere for a bolt that was m6-8 inches long

 

[DBLWhip40]

i went to home depot and all the threaded stuff didnt work because its different thread count

 

[byreen]

wow i thought home depot would have one =/

 

[humpurple kushiones]

http://www.boltdepot.com/product.aspx?cc=13&cs=71&cm=25&cd=1222

Last row in the box at the bottom, type 1 in the box and checkout.

do you really need 250 compression bolts?

 

[Matt]

All the way on the left you can buy one

 

[Jon.]

home depot works

 

[DBLWhip40]

home depot desent work, homedepot dosent sell 20 thread count

 

[idk47]

Ian NO. It's m6 and they don't make m6 bolts 8 inches long. Get a threaded rod and weld a nut at the end or order a compression bolt through SR because I looked everywhere for a bolt that was m6-8 inches long

Just look at the chart dude, it's there i've bought one before.

 

[DBLWhip40]

Ian NO. It's m6 and they don't make m6 bolts 8 inches long. Get a threaded rod and weld a nut at the end or order a compression bolt through SR because I looked everywhere for a bolt that was m6-8 inches long

Just look at the chart dude, it's there i've bought one before.

i would. but its more to ship the bolt than it is for the bolt

 

[Hep Greg]

where do compress bolt?

 

[Mattt.C]

compression bolt do you, lmao

 

[AnthonyPellino]

SR store period it isn't 1/4 for the bolt. It is m6 and I looked through my local hardware store twice, and through home depot. You have to get it through the SR store

 

[kyle199]

hehe i got it custom made by my dad at his work so i was im all good coz i just got french id forks so nice love them

 

[redline582]

If you still can't find one or you're poor, go to home depot, find a threaded rod that fits, cut it to size, and jb weld a nut onto the end so you can tighten it.

This is the easiest.