What's wrong with my Brass Knuckles!

JohanGrunwald

JohanGrunwald

Member
Hey.

I just got a Brass Kncukles, and It's awesome. But.... The problem is, that when I add my wees in it, the bars will still move. It's not the headset or the lower side of the clamp, but only the top where my bars are. And yes, I remembered the red shim. But when you're using wees, then do you need and extra shim or something? Cause when you buy wees, you always get an extra shim for your Razor clamps. i tried to add the wee shim into the red shim, but it won't fit. What's the problem?!

Thanks
 
Madis

Madis

Super Geek
Staff member
Johan Grunwald said:
Hey.

I just got a Brass Kncukles, and It's awesome. But.... The problem is, that when I add my wees in it, the bars will still move. It's not the headset or the lower side of the clamp, but only the top where my bars are. And yes, I remembered the red shim. But when you're using wees, then do you need and extra shim or something? Cause when you buy wees, you always get an extra shim for your Razor clamps. i tried to add the wee shim into the red shim, but it won't fit. What's the problem?!

Thanks
Click to expand...
Please read the bold underlined text.

The shim that comes with wees is for RAZOR CLAMPS. You should not use the wee shim if you want to use them on a SCS kit.

Cut 2" off the bottom of the steertube, so there would be no slits and it would be 21" high again instead of 23".
Put the red shim directly on the bars and put the wee shim in your closet.
 
J

Josh Herman

Member
Yea exactlly cut it or cut a old razor fork and stick the tube where the theads are up the bars when putting the bars on to the scs.
 
You must log in or register to reply here.
Top