Wheels and bearing problem HELP

[james blott]

Ok i got proto wheels
when i put the bearings in and spacers the wheel goes heaps tight and the bearing don't spin
If i take the spacer out the wheel wobles how do i fit this or do i need new wheels

 

[Connorh333]

put grease or some sort of lubricant in the bearing and it should be good

 

[james blott]

Tryed that its like they are crushed and im on my like 7767890 set of bearings

 

[Connorh333]

you could sand down the inside of the wheel and the outside of the bearing

 

[james blott]

No any Legit answers

 

[NickTrella]

Sounds like your spacer needs to be sanded down a bit

 

[michaelpytel]

sounds to me like your spacers to small and isnt doing its job properly, what kind of spacer? have you tried others?

 

[james blott]

Ok i will try that thanks

 

[michaelpytel]

wait when you said you had spacers do you meen between your bearings or normal deck spacers?

 

[james blott]

bearing

 

[michaelpytel]

ok then yeah sounds like your spacers to small so when you tighten its like not haveing a spacer at all to an extent, and your bearings are being compressed together like )=( instead of l=l so just try different, larger spacers.