Your bike thread
- Thread starter Steezeman
- Start date
razorrider48
Member
thanks guys
I was scrolling from the top of the page before, and i was about to tell you to clean your bike and get a straight cable, cause gyro looks hella ugly. Then i get to the bottom and you must of red my mind. haha.
And yea alex. I was breakless for like 3 months, but i got a baby blue linear so i put my breaks back on. I dont think i would go breakless ever again.
And yea alex. I was breakless for like 3 months, but i got a baby blue linear so i put my breaks back on. I dont think i would go breakless ever again.
Roycee
Member
my new bike im building
Frame: WTP millar lite V2
Cranks: Profiles
Seat/Seat Post: Macniel Capital + Macniel SeatPost
Headset/Bottom Bracket: Tripple 666
Stem: S&M Redneck XLT
Forks: Sunday Morning 07
Chain: Shadow Conspiracy MK2 chain
Pedals: Jim Cielinckis
Sprocket: Profile Imperial
Rims: Odyssey 7KA Rims (Back & Front)
Spokes: Primo Coloured
Back Hub: Odyssey Hazard Cassette
Front Hub: Coalition
Brake Cable/Lever: Odyssey Linear Slic, Odyssey Monolever
Brakes: Odyssey Evolvers
Tyres: Odyssey Mike Aitkens (Back & Front)
Bars: Odyssey Civillians
Grips/Barends: ODI
Chain Tensioners: Odyssey Pact
BTW: My bikes only half built ABAHAHA i am soooo lazy when i build it i will post the full bike complete
Frame: WTP millar lite V2
Cranks: Profiles
Seat/Seat Post: Macniel Capital + Macniel SeatPost
Headset/Bottom Bracket: Tripple 666
Stem: S&M Redneck XLT
Forks: Sunday Morning 07
Chain: Shadow Conspiracy MK2 chain
Pedals: Jim Cielinckis
Sprocket: Profile Imperial
Rims: Odyssey 7KA Rims (Back & Front)
Spokes: Primo Coloured
Back Hub: Odyssey Hazard Cassette
Front Hub: Coalition
Brake Cable/Lever: Odyssey Linear Slic, Odyssey Monolever
Brakes: Odyssey Evolvers
Tyres: Odyssey Mike Aitkens (Back & Front)
Bars: Odyssey Civillians
Grips/Barends: ODI
Chain Tensioners: Odyssey Pact
BTW: My bikes only half built ABAHAHA i am soooo lazy when i build it i will post the full bike complete
Lose the stickers, cut the brake mounts, cut down the dropouts, get ride of the gyro thing, slam your stem, cut your steer tube, turn your seat post around, strip your seat. All things you could do to make it looks better for $0. Nice looking cranks though, what are they?
ADNpro
<b>REEEEEEEEEEEEEEVES</b>
going to do all of that, if I turn my seatpost around its exactly the same so that dosent help lol and I might put my brakes back on sometime, not sure.Pirate Alex said:
cranks are Flow..exactly like profile (according to guy at bike shop who has profiles) but a bit heavier
Alex is a n00b and doesnt know how to post picsPirate Alex said:Nah it looks better with the seat post the other way, and the seat's further back.
Here's my friend's bike I just painted some more.
It's a Haro Mirra 540 with a bunch of stuff and without a bunch of stuff aswell.
Double post, sue me.
My bike.
Specs
Frame - Federal Hamilton 19"
Fork - Fit
Bars - uncut Slams
Barends - Stolen
Stem - Hoffman
Grips - ODI Longnecks
Headset - FSA Impact
Seatpost Clamp - N/A
Seatpost - Stump
Seat - Macniel SL
Rear Wheel - Madera hub laced to a Hula Hoop
Front Wheel - Madera hub laced to a Primo 6061 rim
Cranks - DK Chop Stix
Pedals - Primo Mag
Sprocket - Mosh full gaurd
Chain - something
Brakes - Snafu lever and Tektro(?) brakes
Cables - 1664
Gyro - N/A
Pegs - N/A
Tyres - Front - Ruben 2.15, Rear - ASM, 1.85.
Weigh - 28
Mods - Seat post mod, cut seat post/tube, cut axle, doubled up axle nuts, cut/rawed lever, raw cranks/fork (mostly raw haha), painted bar ends, no compression bolt because we only have one between the two of us haha.
Taylor's bike
Specs
Frame - Haro Mirra 540
Fork - S&M
Bars - Something big
Barends - Odsy.
Stem - Fly
Grips - Odsy.
Headset - FSA PIG
Seatpost Clamp - N/A
Seatpost - Shadow mean
Seat - Stripped Haro
Rear Wheel - Odsy Hazard Light, 10 tooth.
Front Wheel - Something
Cranks - Haro
Pedals - Mag
Sprocket - N/A
Chain - N/A
Brakes - N/A
Cables - N/A
Gyro - N/A
Pegs - N/A
Tyres - Front - Primo, 2.15, Rear, ASM, 1.85.
Weigh- 25ish
Mods - Cut seat post/tube, bandana on seat, everything painted, cut axles
And both bikes
My bike.
Specs
Frame - Federal Hamilton 19"
Fork - Fit
Bars - uncut Slams
Barends - Stolen
Stem - Hoffman
Grips - ODI Longnecks
Headset - FSA Impact
Seatpost Clamp - N/A
Seatpost - Stump
Seat - Macniel SL
Rear Wheel - Madera hub laced to a Hula Hoop
Front Wheel - Madera hub laced to a Primo 6061 rim
Cranks - DK Chop Stix
Pedals - Primo Mag
Sprocket - Mosh full gaurd
Chain - something
Brakes - Snafu lever and Tektro(?) brakes
Cables - 1664
Gyro - N/A
Pegs - N/A
Tyres - Front - Ruben 2.15, Rear - ASM, 1.85.
Weigh - 28
Mods - Seat post mod, cut seat post/tube, cut axle, doubled up axle nuts, cut/rawed lever, raw cranks/fork (mostly raw haha), painted bar ends, no compression bolt because we only have one between the two of us haha.
Taylor's bike
Specs
Frame - Haro Mirra 540
Fork - S&M
Bars - Something big
Barends - Odsy.
Stem - Fly
Grips - Odsy.
Headset - FSA PIG
Seatpost Clamp - N/A
Seatpost - Shadow mean
Seat - Stripped Haro
Rear Wheel - Odsy Hazard Light, 10 tooth.
Front Wheel - Something
Cranks - Haro
Pedals - Mag
Sprocket - N/A
Chain - N/A
Brakes - N/A
Cables - N/A
Gyro - N/A
Pegs - N/A
Tyres - Front - Primo, 2.15, Rear, ASM, 1.85.
Weigh- 25ish
Mods - Cut seat post/tube, bandana on seat, everything painted, cut axles
And both bikes
Haha, Taylor's always had a really tilted back seat, this one's actually less tilted back than the one that was zip-tied to his frame haha. And I used some paint stripper that barely did anything then just sanded them down. Next time I'll use some aircraft paint stripper. And do you know how bar ends work? That's pretty much how my seat post works. I got a wedge thing from a 1" threaded fork and put the bolt through the seat/post instead of the normal bolt so that one bolt holds the seat onto the post and the post in the frame.
Cory, look at my bike!
Cory, look at my bike!