YOUR SCOOTER #3

Status
Not open for further replies.
J

jakob-b

Member
and yes dylan ive tryed pegs i just didnt llike them they were something i used all the time so im like w,e and took them off




crap sorry double post ...
 
J

Jimmy23

Member
5/16, a hex bolt works fine if you were looking to to bolts on both sides i would recomend getting, the bolt length depends on how long you want the pegs to be, and if you want them on both sides.
 
Matt Dibble

Matt Dibble

M3MB3R
Staff member
im so depressed i never have any new scoot pics to show.. haha. I wanna buy a pro model just to mod it because i havent gotten to really mod anything in a long time.

my first scoot i bought in the spring in case my KC pro broke before the XW comp.... and then my backup is the KC pro and i got it last like november. Both are strong as ever. full deck reinforcements and shit. i have broken 1 fork between the 2 and ive broken like 5 wheels... and i broke a brake off randomely. Thats really the only problems ive had. Oh shitt i gotta get one of them bars to pound through the t tube because i hate when mine start to get shakey...


random post eh?
 
S

scooterpro

Member
GC_Derek said:
600th Reply...

1510061017ob6.jpg

Its a Madd scooter (AKA Blade scooter... 'Case you didnt know Madd and Blade are the same...)

Its basicly stock sept for the shit he put all over it, a bolted mech, YAKs and pegs... The pegs are hella fun by the way... Hes got some pretty cool stuff down with them aswell...

Edit: Dont ask about the mech either... Its just more secure and the bolts keep each other from wobbleing undone.
Click to expand...
wow lots of bolts for ya foldy mech
 
N

nixon

Member
scoot1.jpg



joescoot2.jpg


New scoot {-)

Yak front ,Micro MC back
Cliche bearings
Bolted mech
Stock headset
reinforced fork
Shadown Con T_tube
Shadown con grips + Bar ends


Loveeely
 
N

nixon

Member
Why thankyou :)

O yea for people that ride B's with Metal cores ..some off you might of got this really anooying clicking sound ..


http://micro-xtreme.com/shop/images/Bearing_Disk.JPG

I got some off these when i got a Micro

bearing.jpg


So the axel goes throw

Normal spacer you get on b's
One of those washers with the beveld bit pushing into the Bearing
Threw wheel
Micro washer on other side pointing in again
Standard washer
Then i used the spacer you get inbetween the bearings in wheels


It makes it pritty much central and no clicking!!!

Hope it helps
 
Madis

Madis

Super Geek
Staff member
Nixon,
1) why is the brake so low? Is that thouching your wheel or your brake bolt is bent and turned opposite?
2) why did you change your reinforced sprite to a non-reinforced jdbug b-model? Something happened?
3) is that a some kind of seatpost you used as a t-tube?

"Loveeely" - well said, looks solid (except the stock headset). Original.
 
N

nixon

Member
Erm i duno why the brake is low ?works fine so i dont care to much :)

Craked my reinforced Micro from doin icepicks i think ...on the dropouts ..

And yes its a bmx seat post

O and iv had a FSA pig and tbh didn't think much to it

Stocks fine...Nice and tight fast smooth .. sal good {-)
 
B

Brian Boston

I got myself banned.
Hmm i had the really annoying clicking sound, i took the wheels off though. Im probably building another scooter soon, im about to try hem little plate things. Thanks for the tip.
 
Madis

Madis

Super Geek
Staff member
Make your own, you just need to get 20x20x2mm Alu pipes. Even i could cut you some pieces and send you. Although my micro came with prebuilt reinforcements, i found a company with a lot of aluminium pipes and stuff, so i could probably get new reinforcemets there for ya. If you're interested, we could talk through PM. The catch is that i won't drill you the holes.
 
S

Steezeman

Administrator
Sick scooter, I thought that was a seat tube as a t-tube, I might try that. You should put some wider bars on there though ;)
 
Status
Not open for further replies.
Top