YOUR SCOOTER #3
- Thread starter Madis
- Start date
- Status
Snow Patrol
Member
stock parts only<3
all i do is bolt the mech and take out the bottom renforcement under the mech.
then for bearings and cups
Soak them in gasoline and swish them like no other.
immediatly wash with water and dry.
right after i add a mixture of 3 in 1 oil, piston lubricant, and vasoline.
the bearings run better than most bones super swiss.
and the headset will spin about 10 full barspins, and make no noise at all, so its smooth like an FSA.
all i do is bolt the mech and take out the bottom renforcement under the mech.
then for bearings and cups
Soak them in gasoline and swish them like no other.
immediatly wash with water and dry.
right after i add a mixture of 3 in 1 oil, piston lubricant, and vasoline.
the bearings run better than most bones super swiss.
and the headset will spin about 10 full barspins, and make no noise at all, so its smooth like an FSA.
Andy Rhode
Member
wow
[link=hyperlink url][/link] http://i145.photobucket.com/albums/r218/NjxRiderx92/100_0841.jpg
Kevintuccori
Member
nice scoot bibito
farmboy uk
Steel Member
you're lucky you can ride a stock john as you get free scoots, the rest of us arn't so lucky 
Dylan Kasson
Steel Member
heres my new pro model
my 2 fsa headsets are broke so im riding the stock one
its actually not that bad
and if any of you have rad bars and you have a new pro model put the griptape on them it makes it look sweet
my 2 fsa headsets are broke so im riding the stock one
its actually not that bad
and if any of you have rad bars and you have a new pro model put the griptape on them it makes it look sweet
- Status