[CENTER]Rawing Bars? [B]Oven Cleaner?[/B][/CENTER]

[evanreed]

 

[9cdmc]

sandpaper
nuff said

 

[issac p]

sandpaper sucks. leaves a terrible finish
paint remover works great

 

[Brock]

Oven cleaner doesn't work with paint/powdercoat, only anodize. Just use paint stripper and sandpaper and then use some fine sandpaper at the end to give it a good finish, also for a good finish only sand in the one direction.

 

[issac p]

yeah what brock said

 

[Michael Aylsworth]

airplane paint remover or gasket remover makes powder coat bubble and come off with just a puddy knife or screw driver, you can get em at any auto parts store.

 

[Robert]

just sand it

 

[evanreed]

Sanding sound good and easy

Btw how do I change my title for this thread

 

[Robert Reichley]

Sanding sound good and easy

Btw how do I change my title for this thread

Not true. The paintstripper method is wayyy easier and less time consuming. Literally its like spraypaint. Spray it on, go do something else for 5 minutes, come back and then it should be all bubbled up and cracked and very easy to scrape off

 

[cody]

What works really good after you use paint stripper that I did with my DH frame, was use a pressure washer after so you don't burn your hands getting it off, Sprays right off.

 

[R-Dubya]

Am I going to be the only one to point out how this kid completely failed in making the title of this thread?

 

[Michael.]

Am I going to be the only one to point out how this kid completely failed in making the title of this thread?

i was thinking the exact same thing lol.

 

[MyNameIsJordan]

Oven cleaner doesnt even work for anodize.

 

[callummm]

need like caustic oven cleaner not just any stuff lol