Ihc
- Thread starter dan1994
- Start date
Chris Picone
Member
essentially it just makes the compression ring and HIC shim all one piece. nothing revolutionary.
they fit "standard size bars" because they downsized the forktube. that interently makes it weaker.
they fit "standard size bars" because they downsized the forktube. that interently makes it weaker.
Blunt Scooters
Member
Come on Chris, you go to Engineering school.. it’s the thickness of the tube not the O/D that gives it strength. The Declare forks tube wall thickness is 4.3mm, add its cold forged and further add there is a 2mm solid sleeve wrapping it. So no it doesn’t make it weaker than a normal 28.6 tube.
DavidBryson
Steel Member
these sound siiiick
when are they coming out? (if they arent already out, idk im a noob)
and how much will they cost?
and when u say standard bar and clamp, that means you don't need to buy a hic clamp or anything right?
when are they coming out? (if they arent already out, idk im a noob)
and how much will they cost?
and when u say standard bar and clamp, that means you don't need to buy a hic clamp or anything right?
Connzi machell
Member
FFSSS.. already like 13942 threads.
Blunt Scooters
Member
Hey nice guy,
Yeah man no need to buy oversize bars or compression clamps.. you can just run your stock standard clamp and Alu or cromo bar. Just makes things a bit easier.
Coming out in about 3 weeks.. Cost will be up to the local distro.. but not costly at all.
Yeah man no need to buy oversize bars or compression clamps.. you can just run your stock standard clamp and Alu or cromo bar. Just makes things a bit easier.
Coming out in about 3 weeks.. Cost will be up to the local distro.. but not costly at all.
DavidBryson
Steel Member
awesome 
ill probs buy em once i try some(if i like em)
and dw about answering my visitor message (posted before reading this thread)
ill probs buy em once i try some(if i like em)and dw about answering my visitor message (posted before reading this thread)
RockinTheCasbah
Member
Its cold forged which means the tube actually has a second hardening process after being produced which gives it a uniform wall thickness and increases strength significantly. Also the landing ring is still on the fork itself so there is no change there. Futhermore they will never be ran without the IHC shim and with the shim it has a wall thickness greater then almost every other fork out there.
Not weaker..
kyle likes to scoot
Member
my next forks i think
christianewing
Steel Member
i actually want this fork...really bad.
cralle
Bronze member
Cold forged dont matter, people have snapped some of the new french id forks and they are coldforged.
allyscooterkid1998
Member
have mv2 adelaide ordered any?
ashcanscoot
Bronze member
would these work with an unsealed semi integrated headset
allyscooterkid1998
Member
It works with any unsealed headset
