scooters

[dezbert]

so im thinking of reinforcing my pro model deck. i've heard that the aluminum square reinforcements are good but what about steal strips? would they be better/same/worse? thanx

 

[gerkin of honour]

the steel strips are easier to put on and if they are thick they will be stronger than box. but they are lighter.

 

[Nick Morland]

look at my dp do that for reinforcements

 

[P4RK3R]

]
the steel strips are easier to put on and if they are thick they will be stronger than box. but they are lighter.

no, the steel strips are about the same weight as the aluminum box

 

[--lillee--]

where can u buy this metal in england or online where can ship to England cheaply

 

[Mike Montgomery]

aluminum square reinforcement!

 

[gerkin of honour]

]
the steel strips are easier to put on and if they are thick they will be stronger than box. but they are lighter.

no, the steel strips are about the same weight as the aluminum box

actually my friend had strip reinforcements and i have box reinforcements and they are heavier. just by a little bit

 

[dezbert]

ok thanks guys.....i just wasn't sure. so are there any differences in the strength of both of them or are they the same? because steel strips seem just as strong but easier to put on.

 

[dezbert]

sorry to keep asking questions but, i've only seen a couple pics of steel srip reinforcements and a lot of pics of square reinforcements. could anyone that has steel strip reinforcements post some pics? thanks.

 

[gerkin of honour]

my friend is on holidays so i can't get his reinforcements.

 

[dezbert]

k thanks anyway tommo[AIR]

 

[ben-pat-bro]

use aluminiium strips

 

[dezbert]

wait benthompson.....do u mean steel strips or aluminum strips?

 

[gerkin of honour]

aluminium is what i was talking about

 

[dezbert]

ok cool just making sure

 

[dezbert]

also with the reinforcements, can i attach them with the 4 screws on the side of the deck(pro model) as well as the back axel, or should i buy another screw and bolt to attach it in the front? will the front deck screws work to attach the reinforcements to the deck?

 

[gerkin of honour]

double post. also you should drill holes where those screws up the front of the deck are and put the bolts back in so the screw to the foldy plate. but if you have taken your foldy plaate out then use axle screws and screw them in because they are big for the hole and will squeeze in and hold. also do the back axle thing.

 

[ben-pat-bro]

]
double post. also you should drill holes where those screws up the front of the deck are and put the bolts back in so the screw to the foldy plate. but if you have taken your foldy plaate out then use axle screws and screw them in because they are big for the hole and will squeeze in and hold. also do the back axle thing.

thats wat she said

 

[jacksongross]

FUCK THAT WAS LAME

 

[ben-pat-bro]

i know ayy im ashamed in myself =[[[